Manuals / Miele / Kitchen Appliance / Dishwasher

Miele G 7883 CD installation instructions Frequently asked questions, What if

Models: G 7883 CD

1 76

Download 76 pages 2.29 Kb

Page 58

Frequently asked questions

What if...	Possible fault	Solution
The rinse program is		Before addressing the
interrupted and the		error:
"Fill/Drain" indicator		–	Turn the program
light is flashing.			selector to f. The error
			message is erased.
		–	Press the On/Off button
			to switch off the
			machine.
	Error message: F..A:	–	Clean the filter
	There is a problem with the		combination in the wash
	water out take.		cabinet.
		–	Clean the drain pump.
		–	Clean the non-return
			valve.
		–	Remove any kinks in the
			drain hose.
		Then:
		–	Switch the washer on.
		–	Drain the water.
		–	Restart the program.
The water in the wash	Error message: F01 - F03,	–	Clean the filter
cabinet does not get	F18, F19, F27		combination in the wash
hot; the program	The washer is equipped with		cabinet.
sequence lasts too	a temperature sensor that	–	Rearrange the
long.	switches off the heater when		glassware.
	it begins to overheat.	–	Reset the Thermo
	Overheating can occur		switch. See "Frequently
	when, e.g., large items		asked questions -
	cover the heating elements,		Thermo switch".
	or when the filters in the
	wash cabinet are blocked.

58

Image 58

Miele G 7883 CD installation instructions Frequently asked questions, What if

Contents

Laboratory Glassware Washer G 7883 CD Operating and Installation Instructionsen - US, CA Page Contents Contents Program Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Programming functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 The following instructions apply to all programming functions:. . . . . . . . . . . . . . . 36 To access the programming mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Saving to memory and exiting the programming mode . . . . . . . . . . . . . . . . . . 36 Exiting the programming mode without saving . . . . . . . . . . . . . . . . . . . . . . . . 36 DOS 1 liquid detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Setting the detergent dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Priming the dosage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 DOS 3 neutralizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Setting the neutralizer dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Priming the dosage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Changing program parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Changing the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Changing the holding time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Restoring the factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Setting the time and date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Resetting the coarse and fine filter timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Data transfer optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Routine checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Thermo switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 INSTALLATION INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS ~Take care when handling processing chemicals detergents, softeners, neutralizers, etc.. These may contain irritant or corrosive ingredients. Do not use organic solvents as these could cause an explosion. Wear protective gloves and goggles. With all chemical agents the manufacturer’s safety conditions must be observedIMPORTANT SAFETY INSTRUCTIONS Accessories IMPORTANT SAFETY INSTRUCTIONSPlease note the following symbols on the machine SAVE THESE INSTRUCTIONSGuide to the lab washer a Drying unit h Service panel i Serial interfaceGuide to the lab washer c Dispenser for powdered detergentStandard model Description of the machineIntended applications: Laboratory equipment To open the door Opening and closing the doorElectric door lock To close the doorSetting the water softener Water softenerfactory setting SettingsWater softener Filling the salt reservoir Water softenerSalt indicator Water softenerRinse Aid Adding rinse aidSetting the rinse aid dosage Rinse aid indicator lightRinse Aid Neutralizing agent Adding neutralizerNeutralizer indicator light Neutralizing agentDetergent Setting the liquid detergent dosageAdding detergent Liquid detergent refill light Detergent^Load the detergent into the compartment Detergent^Snap the cover closed Loading the machine Prepare items before loading Loading the machineLoading the machine Special preparations before operating the machineTo adjust the upper basket Adjusting the upper basketSpring adapter for the water connection Loading the machineLaboratory equipment Loading the machineFor various inserts Loading the machineUpper basket O Lower basket UO Injector wagon Loading the machineE Injector wagon For narrow necked glasswareStarting a program Turning onSelecting the optional drying function Program sequence display Turning off End of a programAdditional drying Canceling a program Program Guide Program Guide Program sequenceSaving to memory and exiting the programming mode Programming functionsTo access the programming mode Exiting the programming mode without savingProgramming functions DOS 1 liquid detergentSetting the detergent dosage StepProgramming functions DOS 3 neutralizerSetting the neutralizer dosage StepBuzzer Programming functionsChanging the wash and rinse parameters Changing program parametersProgramming functions Changing the drying parametersChanging the holding time Step Changing the temperature StepProgramming functions Display / ResultRestoring the factory settings Programming functionsSetting the time and date Programming functionsResetting the coarse and fine filter timer Programming functionsData transfer optional Maintenance Routine checksCleaning and Care Cleaning the filters in the wash cabinetCleaning and Care Cleaning the fine, flat and micro-finefiltersCleaning and Care Cleaning the spray armsRemoving the spray arms Cleaning the drain pump and non-returnvalve Cleaning and CareCleaning and Care Cleaning the water inlet filtersCleaning the filters Cleaning the wash cabinet Cleaning the control panelCleaning the exterior Cleaning the door sealBaskets and inserts Cleaning and CareSolution Frequently asked questionsPossible fault What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifSolution Frequently asked questionsPossible fault What ifSolution Frequently asked questionsPossible fault What ifSolution Frequently asked questionsPossible fault What ifThermo switch Frequently asked questionsV1-800-565-6435service@miele.ca After Sales ServiceU1-800-991-9380techserv@mieleusa.com INSTALLATION INSTRUCTIONS Leveling the legs InstallationPositioning and securing the machine Installation Removing the lid if necessaryProtecting the countertop Cover plate protects the countertopTHIS APPLIANCE MUST BE GROUNDED Electrical connectionGrounding connection Connecting the water inlet PlumbingPlease also refer to the installation diagram PlumbingDI Connection pressurized PlumbingDI connection unpressurized optional Drainage PlumbingEnglish Technical dataMetric Disposal of the packing materials Caring for the environmentDisposal of an old appliance Page Subject to change without notice / M.-Nr.07 157 440 /