Installation
2.Install the mounting brackets
To ensure stability, this dishwasher should be securely attached to the countertop with the two mounting brackets included.
^Insert the tab of each bracket into the guide holes on the top of the dish- washer.
Stone or marble countertops:
Do not install these mounting brackets if the counter is made of an extremely hard material. The securing screws for the mounting brackets are not suitable for such materials.
3. Install the slide skis
Two slide skis are included and should be installed on the feet of the dish- washer before the machine is pushed under the countertop. This will allow the machine to slide easier, protect the floor, and allow adjustment of the rear leveling legs from the front of the ma- chine.
^First, adjust the height of the legs so
that the top of the dishwasher is roughly 1/8" (3 mm) below the countertop.
Tipping the machine slightly to the rear, if possible, will make adjusting the front legs easier. Make sure the machine is level when adjustments are complete.
^Place the skis, with the ratchet at the rear, under the dishwasher legs.
12
