Installation
Power outlet
The power outlet for the appliance must be installed within a cabinet, on a wall adjacent to the undercounter space in which the dishwasher is located. An o- pening through the partition between the compartments of 1 1/2" (3 to 4 cm) can be made to allow the plug to pass through.
Permanent Connection (Hard Wiring)
For hard wiring, the power cord must be disconnected from the terminal box located at the lower left front of the dishwasher, behind the toekick and ser- vice panel. Pass the permanent power supply cable through the strain relief and secure it to the terminal box.
Connect:
L1 (Black) to L on terminal block
N(White) to N on terminal block GRND to ground connector
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded metal, permanent wir- ing system, or an equipment grounding conductor must be run with the circuit conductors and con- nected to the equipment grounding terminal or lead on the appliance.
Use copper conductors only.
,Hardwiring the dishwasher should only be done if required by local electrical codes, and then in accordance with those codes. Do not cut the plug off the power sup- ply cord and connect it directly to the house wiring.
34
