|
| Installation | |
8.Install the custom door | As long as the panel length calculated | ||
panel | is within the Range of Panel Sizes | ||
A custom door panel matching the | listed, the custom panel should fit with- | ||
out a problem. | |||
kitchen cabinetry can be installed using | |||
|
| ||
the provided templates and bracket. | Range of Panel Sizes | ||
| |||
| G 636 - G 698 | ||
| Length: | 19" - 23 3/4" (483 - 603 mm) | |
| Width: | 23 1/2" (598 mm) | |
| G 801 - G 832 | ||
| Length: | 21" - 25 3/4" (533 - 654 mm) | |
| Width: | 17 1/2" (445 mm) | |
| G 836 - G 898 | ||
| Length: | 21" - 25 3/4" (533 - 654 mm) | |
| Width: | 23 1/2" (598 mm) | |
X= Panel length
A= Height to the underside of the countertop
B= Control panel height* C = Toe Kick Height
Length X:
Determined using the following calcula- tion: X = A – B – C
*Control panel height is determined by the height of the drawers in the cabinets. This height is adjustable between 4 1/2" and 5 3/4" (112 - 145 mm) with the filler strips provided. An additional filler strip and foam inserts may be ordered to reach 6" (154 mm) in height.
Note:
The maximum panel length is only ap- plicable when no filler strips are used. The door panel thickness should be 3/4" (19 mm).
Custom door panels should be finished on all edges. Trim kits are not available for custom door panels.
19
