Installation
^Attach the panel to the dishwasher by aligning the bracket tabs with the slots on the door.
^Open the dishwasher door slightly. If the locking screws on the edge of the dishwasher door can not be reached, the dishwasher will have to be pulled out of its opening a few inches.
^Push up one side of the door panel until it touches the filler strips (or con- trol panel if filler strips are not used) and lightly tighten the T20 Torx screws on the corresponding edge of the machine door. Do not use a power screwdriver.
^Repeat the process with the other side of the door panel.
^Shut the door.
^Check that the door panel is adjusted correctly. It should be snug at the top and neatly aligned with the cabinet doors and drawer lines. If it is not aligned properly, loosen the Torx screws and adjust the panel.
Once the door panel is positioned cor- rectly:
^Open the dishwasher door.
^Tighten all the Torx screws on the edges of the dishwasher door.
^Use the provided caps to plug the locking screw access holes.
23
