Miele HG02 Drainage system specifications, Maximum drain hose length 12 ft, 3.5 m, procedure

		Installation
Drainage system specifications:
The machine comes equipped with:
–	A 5 ft. long (1.5 m) flexible drain hose
	with an internal diameter of 7/8"
	(22 mm). Drain hose extensions can
	be ordered from Miele’s Technical
	Service Department.
–	A built-in swivel connector allowing
	the drain hose to be routed in any
	direction.
–	A built-in mechanical non-return
	valve on the discharge side to pre-	Connect the supplied drain hose to the
	vent waste water from flowing back
	into the dishwasher.	drain pipe of the kitchen sink either:

– A built-in odor trap on the discharge	–	above the P trap using the clamp
side to prevent odors from entering		provided, or
the kitchen.	–	to the dishwasher connector of the
Maximum drain height: 39" (1 m)		garbage disposal.

Maximum drain hose length: 12 ft	When connecting the drain hose to
(3.5 m)
	the garbage disposal, make sure to
Do not shorten the drain hose.	remove the knockout from the con-
	nection nipple. (See the disposal
Do not connect the drain hose to	manufacturer’s instructions for this
	procedure.)
anything but a genuine Miele hose.
Other hoses may melt or collapse.

31