Installation
10. Adjust the door springs
^Open the dishwasher door halfway.
If the door remains in this position when released, the springs are adjusted cor- rectly.
If the door drops, the tension on the springs needs to be increased.
If it closes on its own, the tension on the springs need to be decreased.
^To adjust the door springs use a T20 Torx or a small slotted screwdriver and turn the screw located behind the door in the upper front strip, on the left hand side of the dishwasher. Do not use a power screwdriver.
–turn clockwise to increase the tension
–turn counterclockwise to de- crease the tension.
Note:
If the door springs can not be adjusted enough (the door falls), the custom door panel is too heavy.
Call your Miele dealer or Miele’s Techni- cal Service Department for advice on stronger door spings.
28
