Miele PW 5065 manual Water connection, Cold water connection, Maintenance, Extension hoses

Installation

Water connection

Cold water connection

A water faucet with 3/4" threat must be provided on-site. If none is available the machine must be connected to a water line by a qualified plumber.

The water pressure must be between

14.5-145 psi (1 -10 bar). If the water pressure is greater than 145 psi

(10 bar), a pressure reducer must be installed. If the water pressure is below 15 psi (1 bar), there will not be enough water available for a complete fill.

The cold water hose (blue mark) is not suitable for a hot water connection.

^Connect the cold water intake hose (blue mark) to the cold water valve.

^Turn on the valve(s) and check for leaks.

The water intake hoses are equipped with screen filters. Do not remove these filters except for cleaning.

Maintenance

Replace the water hoses only with genuine Miele hoses.

Extension hoses

Extension hoses (8’ 2" or 13’ [2.5 m or 4 m]) may be obtained from Miele.

49