Minimum Iron rinses, External dosage | Miele PW 5065 specs

Menu Settings - Supervisor level

MINIMUM IRON rinses

The program "MINIMUM IRON" allows you to change the number of rinses.

2 rinses (factory set)

3rinses

4rinses

External dosage

The washer is set for connection to an external detergent dosage system. To use the external dosage system the setting must be adjusted/set accordingly.

The machine comes factory set with this option turned off.

Pre-rinse COTTONS

The program "COTTONS" allows a pre-rinse of the laundry.

The machine comes factory set with this option turned off.

Pre-rinse MINIMUM IRON

The program "MINIMUM IRON" allows a pre-rinse of the laundry.

The machine comes factory set with this option turned off.

Spin - free of charge

When operated by a coin mechanism, the program "Spin" can be offered free of charge.

The machine comes factory set with this option turned off.

Leaving the Settings menu

^Press "back" and confirm with OK. The display shows the main menu.

63

Image 63

Miele PW 5065 manual Minimum Iron rinses, External dosage, Pre-rinse Cottons, Pre-rinse Minimum Iron, Spin free of charge

Contents

Operating manual Washer Contents Technical Safety Important Safety Instructions Use Children Using accessories Door button Guide to the washerControl panel Display with -, OK and + buttons OK button Temperature conversions Celsius FahrenheitDisplay + buttons First wash Before using for the first timeSetting time of day Reminder of the shipping struts Using the washer Sort the laundryGeneral tips Close the drum door Load the laundry Delay Start Select a programPre-wash Adding detergent Too little detergent may causeToo much detergent may cause Remove the laundry Starting a programAt the end of a program Coin mechanism Changing a program Canceling a programAdjusting the temperature Adjusting the spin speed Drum door cannot be opened if Adding/removing laundry during a wash program Program guide Dark garments 40C to cold 104C to cold Bed linen 60C to 40C 140F to 104FCurtains 40C to cold 104C to cold Denim 40C to cold 104C to cold Pillows 95C to 40C 203F to 104F Special programs Quick wash 40C 104FShirts 60C to 40C 140F to 104F Starch Proofing 40C to 30C 104F to 86F Do not use agents containing paraffinExtra Rinse Towels short 40C 104F Intensive Wash 60C to 40C 140F to 104FFlour 95C to 40C 203F to 104F Grease and fat 95C to 40C 203F to 104F Hygiene Towels + 60C to 40C 140F to 104FCapes 30C 86F Chem. Therm. Dis min 60C 140F Main wash Rinse Spin Program sequence Special features in the program sequence Anti-crease Symbols Selecting a spin speed Changing the delay start Delay StartSetting the delay start Starting the delay start Normal soiling DetergentWater hardness Water softener Dye removers / Fabric dyes Fabric softener, liquid starch Cleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questions Display message Possible cause Solution Display shows a fault message General problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Open the drum door Remove the lint trap lid Machines with a drain valve Changing the light bulb Repairs After sales servicePC Update Optional accessoriesPage Installation Instructions Front view Installation Rear view Do not lift the washer by the drum door Installation siteInstallation Removing the shipping struts Pull the shipping strut out Pull out the shipping strut out Installation Installing the shipping struts Leveling the washer Height Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid Coin mechanism Extension hoses MaintenanceWater connection Cold water connection Hot water connection Drainage Drain valveDrain pump Electrical connection Technical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Language J Settings JAccessing the Settings J Leaving the Settings menu Selecting the clock display Time of dayDisplay contrast Display brightness Not in current prog. factory default StandbyMemory Entering the code Menu Settings Supervisor level Supervisor level Auto load controlMain wash water Minimum Iron water level Rinse waterLow Water Pressure Cottons water level Cottons rinses Minimum Iron durationSpecial programs list Pre-wash Pre-rinse Cottons Leaving the Settings menuMinimum Iron rinses External dosage Alteration rights reserved