Selecting a spin speed
Program | max. rpm |
COTTONS | 1400 |
MINIMUM IRON | 1000 |
DELICATES | 600 |
Towelling | 1400 |
Table linen | 1200 |
Bed linen | 1200 |
Curtains | 400 |
Denim | 900 |
Dark garments | 1200 |
WOOLLENS | 1200 |
Drain/Spin | 1400 |
Quick wash | 1200 |
Shirts | 600 |
Starch | 1200 |
Pillows | 1400 |
Outerwear | 900 |
Proofing | 800 |
Extra Rinse | 1200 |
Intensive wash* | 1400 |
Flour* | 1400 |
Flour +* | 1400 |
Grease and fat* | 1400 |
Grease and fat +* | 1400 |
Towels short* | 1400 |
Towels +* | 1400 |
Capes* | 600 |
Chem. Therm. Dis. 20 min* | 1400 |
*= Programs can be added from the "Settings - Supervisor level" when activated by Technical Service.
The final spin speed can be reduced. The speeds shown above are the highest available.
Rinse spin
The laundry is spun after the main wash and between the rinse cycles. Reducing the final spin speed will also reduce the rinse spin speeds.
To omit the final spin (Rinse hold)
^Select "Rinse hold". The laundry is not spun and remains soaking in water. This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program.
If the laundry consists of a mixed load, articles which do not require spinning can be removed at this time.
–Starting a final spin
^Select a final spin speed with +. The final spin starts.
–To finish the program
^Press – or "Door". The water will drain.
^Press the "Door" button to open the door.
To omit rinse spin and final spin
^Select "Without spin".
The laundry is not spun after the final rinse but the water is drained away. After the drain cycle the washer goes immediately into the
24
