Delay Start
The delay start feature cannot be used when the washer is operated by a coin mechanism.
The delay start feature allows you to start a program at a later time. The program start can be delayed 30 minutes up to 24 hours.
The time of day must be correctly set to allow the delay start feature to function properly.
Setting the delay start
^Press the m button.
7:51
Start:7:51
Finish:9:19
The display shows the current time of day and the resulting end time.
^Select the desired program end time with +.
7:51
Start:10:32
Finish:12:00
Pressing the button once delays the program end to the next full or half hour. Each touch after that delays it by
30 minutes.
The – button decreases the time.
^Confirm with "OK".
Starting the delay start
^Press the "Start" button.
40°C | 1200 rpm |
Start in: | 2:41 h |
|
|
The display shows in how many hours and/or minutes the wash program will start.
Changing the delay start
^Press the m button.
^Correct the end time of the program with the +/– buttons.
^Confirm with OK.
Canceling the delay start
^Press the m button.
^Change the program end time with the – button until the program start matches the current time of day.
^Confirm with OK.
The program starts immediately.
After the program start the actual load size is measured. This may result in an earlier program end time.
25
