Installation
Electrical connection
,This installation should be performed by an experienced and qualified technician, in accordance with local codes and regulations.
The washer comes with a power cord without a plug.
The machine is supplied as standard for connection to a 208 V, 60 Hz, 20 A,
For extra safety it is advisable to install a residual current device (RCD) with a trip current of 30 mA.
The machine must only be connected to the voltage and frequency shown on the data plate.
,*To convert the machine to another electrical connection, please read the converting manual on the wiring diagram inside the washer. The conversion must be performed by a Miele Service Technician. Additionally the "Heating level" setting must be adjusted.
,Do not install devices to automatically turn the washer off, i.e. a clock timer.
If the machine is hard wired, two 20 A circuit breakers must be provided
52
