Settings J
Standby
The display goes out after 10 minutes and the "Start" button flashes slowly to save energy.
Two options can be selected:
On
The display will go into standby mode:
–if no program is selected after the machine is turned on.
–after a program has started.
–at the end of a program.
Not in current prog. (factory default)
The Standby function will be turned on if no program was selected after the machine was turned on.
By turning the program selector or pressing any button the display is turned on again.
Memory
The Memory function remembers the addition of an extra feature to a program, a change in spin speed or the temperature the next time that program is selected.
Once the wash program is selected again the washer shows the saved options.
The Memory function is factory set to "off".
58
