Menu Settings - Supervisor level
Language J |
|
The display contents can be shown in different languages.
The fixed language selection can be set in the
^Select the desired language and confirm with OK.
The water type (hot/cold) for the
The machine comes factory set with water type "hot".
Supervisor level
The access code for the operator level can be changed.
^Enter the old code.
^Enter the new code.
Once the new code is confirmed, the beginning of the "Settings" menu will appear.
Auto load control
If the Auto load control is turned off the program will run as if for a full load.
The machine comes factory set with this option "on".
Main wash water
The water type for the main wash can be selected (except for the programs "WOOLLENS" and "Curtains"). The hot water intake will only be accessible at a wash temperature of 86°F (30°C) or higher.
The machine comes factory set with the water type "hot" selected.
If the washer is not connected to hot water, the program running times will be extended and vary from the displayed remaining times.
60
