Changing the programme sequence
Once a programme has started
- changing the programme
You cannot change to another programme once a programme has started (this prevents unintentional alterations).
You will need to cancel the current programme before you can select a new one.
-cancelling the programme and then selecting a different programme
Press the Start/Stop button.
The items will be cooled down, depending on the temperature reached and how long they have been dried for.
If you press the Start/Stop button again during the cooling down phase, Finish will light up in the display.
Press the Door button.
Close the door.
Select another programme and start it.
-cancelling the programme and then removing the laundry
Proceed as described in "Adding or removing laundry after a programme has started" below.
Switch the dryer off after closing the door.
Altering Delay start
See "Delay start".
Adding or removing laundry after a programme has started
Press the Door button.
Open the door.
Danger of burning:
Do not touch the back of the drum when adding or removing items. The drum and the items can get very hot.
Add or remove items as required.
Close the door.
Press the Start/Stop button.
Time remaining
The time left shown in the display may now vary from the actual drying time.
19