Programmable functions

Anti-crease setting

Anti-crease helps prevent creasing, if laundry is not normally removed immediately after the end of a programme.

After the programme has finished, the drum will continue to rotate at intervals for:

2 hours (factory default setting).

1 hour.

It is a good idea to leave the anti-crease function activated to help prevent creasing for when it is not possible to remove laundry immediately after the end of the programme.

Follow steps ￿ to ￿ to programme and store in memory.

Before you begin, first ensure that:

The tumble dryer is switched off.

The door is closed.

￿Press the Start/Stop button and keep it pressed in whilst carrying out steps

￿-￿.

￿Press the ￿￿ button in.

Wait until the indicator light for the Start/ Stop button lights up constantly . . .

￿. . . and then release the Start/Stop button.

￿Press the Low temperature button once.

The Low temperature indicator light will briefly flash on and off three times.

P and 2 (default setting) will flash alternately in the display.

The number which appears alternately in the display with P means:

0Anti-crease deactivated

11 hour anti-crease

(The Automatic plus indicator light will also flash once).

22 hours anti-crease

(The Automatic plus indicator light will also flash twice).

(default setting)

￿Pressing the Start/Stop button switches from one number to another.

￿Switch the dryer off with the ￿￿ button.

The setting you have selected is now stored in memory. You can change it again at any time.

46

Page 46
Image 46
Miele T 8822 C operating instructions Anti-crease setting, Anti-crease deactivated Hour anti-crease, Hours anti-crease