Installation, Front view | Miele T 8822 C instruction

Installation

Front view

Mains connection cable	Service panel for condenser unit
Condensed water container	Four height-adjustable screw feet
Control panel	External drainage options (e.g. via

Door

wash basin, wash basin drain outlet, or gully).

36

Image 36

Miele T 8822 C operating instructions Installation, Front view

Contents

Operating instructions For condenser tumble dryer T 8822 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tips Contents Contents Safety with children Correct application Technical safety Correct use Accessories Operating the tumble dryer Control panel Programme duration / Estimated time remaining Display showsFollowing are also selected via the display Garment care label symbols Tips on dryingDrying Ironing How to dry correctly Brief instructionsSort the laundry Turn on the tumble dryer Select any Extra options / Delay start Select a programmeDrying level programmes Remove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Programme chart Cottons Max. load 7 kg Extra dry, NormalHand iron**, Machine iron Delicates Max. load 2.5 kg Normal, Hand iron Woollens handcare Max. load 2 kg Proofing Max. load 2.5 kg NormalOnly use proofing agents which are stated by Manufacturer as being suitable for use on membrane Shirts Max. load 2 kg Normal, Hand iron Cool air Max. load 7 kgWarm air Max. load 7 kg Gentle smoothing Max. load 1 kg Altering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has started Electronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water container Cleaning the fluff filters Cleaning them whilst dry Cleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unit Checking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messages Problem Possible cause Remedy Airways indicatorTo switch off the indicator Buzzer sounds To switch off the indicator Light Indicators for these Cool air programmesWill not start Programmes do not An unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long or Problem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer after Changing the lamp After Sales service Future updates PCAppliance guarantee Optional accessories Installation Front view Installation site Transporting the dryer to its installation siteRear view Replacing the lid Before moving the tumble dryer again e.g. when moving house Levelling the applianceRoom ventilation Washer-dryer stack External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gully Installation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcare Technical data Programmable functions Extending the range of the drying levels Anti-crease setting Anti-crease deactivated Hour anti-creaseHours anti-crease Altering the volume of the buzzer Normal buzzer Default setting Loud buzzer Memory deactivated default setting Memory activated Memory function Extending the cooling down time Follow steps to to programme and store in memoryCooling down time will be ten minutes longer Clean out airways indicator Default setting Keypad tone Adjusting the dryers electronics for very soft water Default setting Adjusted for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560