Problem solving guide
Problem | Possible cause | Remedy | |
Water leaks from the | – The inner cover of the | – | Ensure that the |
dryer after the | condenser unit has not |
| condenser unit is |
condenser unit has | been locked properly |
| positioned correctly |
been cleaned. | and/or the condenser |
| and lock the inner |
| unit has not been |
| cover. |
| positioned correctly. | – | Check the rubber |
| – Fluff has collected in |
| seals. |
| the condenser unit | – | Use a cloth to remove |
| housing. |
| any visible fluff from the |
|
|
| inside of the condenser |
|
|
| unit housing. |
The programme does | No obvious cause. | – | Is the dryer switched |
not start. |
|
| on? |
|
| – | Is the plug correctly |
|
|
| inserted into the socket |
|
|
| and switched on? |
|
| – | Is the door closed |
|
|
| properly? |
|
| – | Has the fuse or circuit |
|
|
| breaker tripped? |
Power cut. | A programme which was running previously will | ||
| continue automatically when power is restored to the | ||
| tumble dryer as long as the Cooling down phase had | ||
| not been reached. |
|
|
The interior drum | The lighting switches off | – | Switch the dryer off |
lighting does not come | automatically (to save |
| and then on again. |
on. | energy). | – | If the lamp needs to be |
|
|
| replaced, follow the |
|
|
| instructions in |
|
|
| "Changing the lamp". |
33
