Electrical connection U.K | Miele T 8822 C specification

Electrical connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply. Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to install a suitable residual current device (RCD). Contact a qualified electrician for advice.

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

42

Image 42

Miele T 8822 C operating instructions Electrical connection U.K, Non-rewireable plugs BS

Contents

Operating instructions For condenser tumble dryer T 8822 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tips Contents Contents Safety with children Correct application Technical safety Correct use Accessories Operating the tumble dryer Control panel Programme duration / Estimated time remaining Display showsFollowing are also selected via the display Drying Garment care label symbolsTips on drying Ironing Sort the laundry How to dry correctlyBrief instructions Turn on the tumble dryer Select any Extra options / Delay start Select a programmeDrying level programmes Remove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Hand iron**, Machine iron Programme chartCottons Max. load 7 kg Extra dry, Normal Delicates Max. load 2.5 kg Normal, Hand iron Only use proofing agents which are stated by Woollens handcare Max. load 2 kgProofing Max. load 2.5 kg Normal Manufacturer as being suitable for use on membrane Warm air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 7 kg Gentle smoothing Max. load 1 kg Once a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has started Electronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water container Cleaning the fluff filters Cleaning them whilst dry Cleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unit Checking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messages To switch off the indicator Problem Possible cause RemedyAirways indicator Buzzer sounds To switch off the indicator Light Will not start Indicators for theseCool air programmes Programmes do not An unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long or Power cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer after Changing the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessories Installation Front view Rear view Installation siteTransporting the dryer to its installation site Replacing the lid Room ventilation Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Washer-dryer stack External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gully Installation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcare Technical data Programmable functions Extending the range of the drying levels Anti-crease setting Anti-crease deactivated Hour anti-creaseHours anti-crease Altering the volume of the buzzer Normal buzzer Default setting Loud buzzer Memory deactivated default setting Memory activated Memory function Extending the cooling down time Follow steps to to programme and store in memoryCooling down time will be ten minutes longer Clean out airways indicator Default setting Keypad tone Adjusting the dryers electronics for very soft water Default setting Adjusted for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560