Cool air programmes, Will not start, Light up | Miele T 8822 C

Problem solving guide

Problem	Possible cause	Remedy
The Denim, Shirts and	No obvious cause.	– Switch the dryer off
Cool air programmes			and then on again.
will not start and the		– Select one of the
indicators for these			programmes.
programmes do not		–	If the programme will
light up.		–	If the programme will
light up.			still not start, there is a
			still not start, there is a
			fault. Contact the Miele
			Service Department.
		–	Use another
			programme in the
			meantime.
The Start/Stop button	The flashing indicates	After the programme has
flashes/does not flash.	that a programme can be	started, the flashing will
	started.	change to a constant
		light.

30

Image 30

Miele T 8822 C Cool air programmes, Will not start, Indicators for these, Programmes do not, Light up

Contents

Operating instructions For condenser tumble dryer T 8822 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tips Contents Contents Safety with children Correct application Technical safety Correct use Accessories Operating the tumble dryer Control panel Programme duration / Estimated time remaining Display showsFollowing are also selected via the display Drying Garment care label symbolsTips on drying Ironing Sort the laundry How to dry correctlyBrief instructions Turn on the tumble dryer Select any Extra options / Delay start Select a programmeDrying level programmes Remove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Hand iron**, Machine iron Programme chartCottons Max. load 7 kg Extra dry, Normal Delicates Max. load 2.5 kg Normal, Hand iron Only use proofing agents which are stated by Woollens handcare Max. load 2 kgProofing Max. load 2.5 kg Normal Manufacturer as being suitable for use on membrane Warm air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 7 kg Gentle smoothing Max. load 1 kg Once a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has started Electronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water container Cleaning the fluff filters Cleaning them whilst dry Cleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unit Checking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messages To switch off the indicator Problem Possible cause RemedyAirways indicator Buzzer sounds To switch off the indicator Light Will not start Indicators for theseCool air programmes Programmes do not An unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long or Power cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer after Changing the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessories Installation Front view Rear view Installation siteTransporting the dryer to its installation site Replacing the lid Room ventilation Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Washer-dryer stack External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gully Installation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcare Technical data Programmable functions Extending the range of the drying levels Anti-crease setting Anti-crease deactivated Hour anti-creaseHours anti-crease Altering the volume of the buzzer Normal buzzer Default setting Loud buzzer Memory deactivated default setting Memory activated Memory function Extending the cooling down time Follow steps to to programme and store in memoryCooling down time will be ten minutes longer Clean out airways indicator Default setting Keypad tone Adjusting the dryers electronics for very soft water Default setting Adjusted for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560