Cleaning and care

Cleaning the condenser unit

Detergent residue, hair and fine fluff from the dryer can get through the fluff filters and block the condenser unit. Dust from the room in which the dryer is installed can also get into the condenser unit and cause a blockage.

Check the condenser unit at least twice a year. Always check it if the Clean out airways indicator light comes on. If the dryer is used frequently then check the condenser unit after approx. 100 drying cycles. Clean it if necessary.

Removing the condenser unit

￿Open the service panel. Hold the panel securely when doing this.

￿Now remove the panel by pulling it diagonally upwards and place it to one side.

￿Turn the lever on the inner cover downwards to the vertical position.

￿Tilt the cover forwards.

￿Remove it by pulling it diagonally upwards.

￿Turn the lever on the condenser unit upwards to the vertical position so that the hook on the lever is no longer in the groove at the bottom of the condenser unit housing.

25

Page 25
Image 25
Miele T 8822 C operating instructions Cleaning the condenser unit, Removing the condenser unit