5-2. Engine Prestart Checks (Robin EH64-Powered Units)

Full

Check all fluids daily. Engine must be cold and on a level surface. Unit is shipped with 10W30 engine oil.

. Follow run-in procedure in en- gine manual.

. This unit has a low oil pressure shutdown switch. However, some conditions may cause en- gine damage before the engine shuts down. Check oil level often and do not use the oil pressure shutdown system to monitor oil level.

Fuel

Add fresh fuel before starting engine the first time (see maintenance label for specifications). Always leave filler neck empty to allow room for expan- sion. Check fuel level on a cold en- gine before use each day.

Oil

After fueling, check oil with unit on level surface. If oil is not up to full mark on dipstick, add oil (see mainte- nance label).

. To improve cold weather starting:

Keep battery in good condition.

Store battery in warm area.

Use correct grade oil for cold weather.

Oil Check

Oil Fill

Full

Gasoline

803 098 / 800 392-J

OM-4407 Page 16

Page 20
Image 20
Miller Electric 301 G, DC, Trailblazer DC manual Engine Prestart Checks Robin EH64-Powered Units, Oil Check Oil Fill