Miller Electric Bobcat 250 Stop engine and let cool Oil Drain Valve, ID x 7 in Hose Oil Filter

. A complete Parts List is available at www.MillerWelds.com

9-4. Changing Engine Oil, Oil Filter, and Fuel Filter (Kohler-Powered Units)

! Stop engine and let cool. 1 Oil Drain Valve

2 1/2 ID x 7 in Hose

3 Oil Filter

Change engine oil and filter accord- ing to engine owner’s manual.

! Close valve and valve cap before adding oil and

Full running engine.

Fill crankcase with new oil to full mark on dipstick (see Section 5-3).

4 Fuel Filter

5 Fuel Line

Replace line if cracked or worn. Install new filter. Wipe up any spilled fuel.

Start engine, and check for fuel leaks.

!	Stop engine, tighten connec-
	tions as necessary, and wipe
4	up fuel.
5

3

2

1

Tools Needed:

803 754 / S-0842

OM-4419 Page 40