Miller Electric Bobcat 250 manual Specifications, Symbol Definitions

. A complete Parts List is available at www.MillerWelds.com

SECTION 3 − DEFINITIONS

3-1. Symbol Definitions

	Stop Engine		Fast		Fast/Slow		Slow (Idle)
			(Run, Weld/Power)		(Run/Idle)
	Start Engine		Read Operator’s	A	Amperes	V	Volts
			Manual
	Engine Oil		Fuel		Battery (Engine)		Engine
	Engine Choke		Check Valve		Do not switch while		Work Connection
			Clearance		welding
	Positive		Negative		Alternating Current		Output
					(AC)
	Welding Arc		MIG (GMAW),		Stick (SMAW)		TIG (GTAW)
	(Electrode)		Wire
h	Hours	s	Seconds		Time		Protective Earth
							(Ground)

Circuit Protector

Temperature

SECTION 4 − SPECIFICATIONS

4-1. Weld, Power, and Engine Specifications

.This unit uses either a Robin EH-65 or a Kohler CH-23 engine. Differences between models are noted throughout this manual.

Welding	Weld Output	Rated	Maximum		Fuel
		Welding	Open Circuit	Generator Power Rating		Engine
Mode	Range				Capacity
		Output	Voltage
		250 A, 25 V,
CC/AC	40 − 250 A	100% Duty	80
		Cycle
				Peak: 10.5 kVA/kW		Robin EH-65
		250 A, 25 V,		Continuous: 9.5 kVA/kW,		Air-Cooled, Two-Cylinder,
						Four-Cycle, 22 HP
CC/DC	40 − 250 A	100% Duty	80	Single-Phase,
						Gasoline Engine
		Cycle		84/42 A, 120/240 V AC,	12 gal
				60 Hz		or
					(45 L) Tank
				(while not welding)		Kohler CH-23
		275 A, 25 V,				Air-Cooled, Two-Cylinder,
		60% Duty				Four-Cycle, 23 HP
CV/DC	17 − 28 V	Cycle	41			Gasoline Engine
		250 A, 28 V,
		100% Duty
		Cycle

OM-4419 Page 12