Miller Electric M-10 Gun manual Symbols And Definitions, Specifications, 115 VAC, 230 VAC

SECTION 3 − DEFINITIONS

3-1. Symbols And Definitions

	Wire Feed	Output	X	Duty Cycle	Do Not Switch
					While Welding
V	Volts	Increase		On	Off
	Gas Metal Arc	Wire Feed Spool
	Welding (GMAW)			Gas Input	Gas Output
		Gun
	Gun
	Voltage Input	Press To Reset	U0	Rated No-Load
				Voltage (Average)

SECTION 4 − INSTALLATION

4-1. Specifications

A. 115 VAC
Rated Welding		Maximum Open-Cir-	Amperes Input at Rated
	Amperage Range		Load Output 115 V, 60 Hz,	KVA	KW
Output		cuit Voltage DC
			Single-Phase
90 A @ 18.0 Volts DC, 20%	30 − 135	32	24.8	2.78	2.23
Duty Cycle

B. 230 VAC

Rated Welding		Maximum Open-Cir-	Amperes Input at Rated
	Amperage Range		Load Output 230 V, 50/60	KVA	KW
Output		cuit Voltage DC
			Hz, Single-Phase
150 A @ 23 Volts DC, 40%	30 − 175	32	25.0	5.74	4.93
Duty Cycle

C. General Specifications

Wire Type and Diameter			Wire Feed	Maximum	Dimensions	Net Weight w/
			Speed	Spool Size		Gun
Solid/Stainless	Flux Cored	Aluminum	50 − 600 IPM	12 in (305 mm)	H: 32 in (813 mm)	168 lb
			(1.3 − 15.2	Diameter	W: 19 in (483 mm)	(76 kg)
.023 − .035 in	.030 − .035 in	.030 − .035 in
			m/min)		D: 39 in (991 mm)
(0.6 − 0.9 mm)	(0.8 − 0.9 mm)	(0.8 − 0.9 mm)

OM-1330 Page 9