Miller Electric M-10 Gun, Millermatic DVI manual Connecting An Optional Spool Gun, End of hose

4-17. Connecting An Optional Spool Gun

4

3

	If a MIG gun is connected to the
	unit, remove it before connecting
1	spool gun.
	1 Diverter Valve
	.If spool gun gas hose is
	equipped with a pre-installed
	barbed fitting, cut off fitting from
	end of hose.

2Connect spool gun gas hose to diverter valve barbed fitting (see

Section 4-16).

2 Gun Trigger Plug

Insert plug into receptacle, and tighten threaded collar.

3 Negative (−) Output Terminal

4 Positive (+) Output Terminal

Place toggle switch in Spool Gun position (see Section 4-16).

Close door.

803 907-B

OM-1330 Page 21