Mitsubishi Electronics 737, C9 Initial Setup, Watching 3D Video, To Watch Regular non-3DVideo

3. Using TV Features 25

3D Video

This section provides Instructions for viewing 3D video using 3D glasses and the TV’s 3D feature. The 3D options are found in the Adjust > 3D Mode menu described on page 34.

Initial Setup

1.Check if your HDMI 3D video source device outputs a 1080p 60 Hz signal. This information will be needed when you assign an input name in the New Device Found screen.

2.If your 3D glasses came with an emitter box, connect the emitter box to the 3D GLASSES EMITTER jack. Place the box in front of the TV where there is clear path to the glasses.

										RS-232C
					DVI/PC INPUT						ANT
					R	AUDIO	L
			AVR	L
	HDMI		AUDIO								3D
			OUTPUT	R			Y/ VIDEO	Pb	Pr	2	GLASSES
1	2	3								INPUT	EMITTER
							Y/ VIDEO	Pb	Pr	INPUT 1
				IGITAL	R	AUDIO	L	(480i / 480p / 720p / 1080i)			-NetCommand
			3D
				AU IO
				OUTPUT

GLASSES

EMITTER

3.Power on the TV and the source device.

4.Connect the source device to the TV’s HDMI input.

5.When the New Device Found screen displays, name the input according to the table below.

The signal type and choice of name are important because the TV will process the video signal differently depending on the name you assign.

If your source device is a Blu-ray disc or game console, the signal must be 1080p at 60 Hz.

Source		Assign
of 3D	3D Video Signal
		Name
Video
Computer	Recommended: 1080p 60 Hz	PC
	(1920 X 1080). The image will fill
	the TV screen.
	Other 60-Hz computer video
	signals compatible with the TV
	will display with black bars. See
	“Computer Display Formats” on
	page 27.
Any other	To see 3D video, the signal must	Any
3D video	be 1080p 60 Hz	other
source		name

6.Press BACK to close the New Device Found screen.

Watching 3D Video

Note: 3D glasses are required.

1.Press ACTIVITY.

2.Highlight the icon for the 3D video device and press

ENTER.

3.Press MENU and select the Adjust > 3D Mode menu.

4.Select On. The On setting will be memorized for the current input when you exit this menu.

Use the Adjust > 3D Mode menu to enable 3D video.

5.Press BACK to close the menu.

6.If the image does not appear correct (e.g., objects appear to be moving in instead of out), open the Adjust > 3D Mode menu and set Glasses L-Rto Reverse.

To Watch Regular (non-3D) Video

The 3D Mode setting is memorized for each input. When you want to watch non-3D video on the input selected above, open the Adjust > 3D Mode menu and set 3D Mode to Off.

Important Note About 3D Images

To display 3D images, Mitsubishi Home Theater DLP TVs require that source devices support checker- board display formats for 3D gaming or 3D cinema content. A 3D standard format does not currently exist for Blu-ray or DVD prepackaged media. Future 3D standards may be incompatible with Mitsubishi Home Theater DLP TVs. Please visit mitsubishi-tv. com for updates and information.