Viewing video images

A. Connecting the projector to video equipment

Preparations:

• Make sure that the power of the projector and that of the video equipment are turned off.

To VIDEO terminal

1

Video cable

 

 

DVI

 

Pb

Cr/Pr

VIDEO

To video output terminal

b/Pb)

R(Cr/Pr)

H/HVV

 

 

RS-232C

S-VIDEO

 

1.Connect one end of a commercially available video cable to the VIDEO terminal of the projector.

2.Connect the other end of the video cable to the video output terminal of the video equipment.

2

Video player, or the like

To S-video terminal

1

S-video cable

DVI

Cb/Pb

Cr/Pr

VIDEO

When the video equipment is equipped with the S- video output terminal, make the connection as follows.

1. Connect one end of a commercially available S-video

cable to the S-VIDEO terminal of the projector.

B(Cb/Pb) R(Cr/Pr) H/HV

To S-video output terminal

RS-232C S-VIDEO

2

Video player, or the like

2.Connect the other end of the S-video cable to the S-video output terminal of the video equipment.

Also read the instruction manual of the equipment to be connected.

This projector does not have any built-in speaker. To reproduce audio, connect audio equipment.

Contact your dealer for details of connection.

When a TV tuner or VCR is connected:

When you use this projector with a TV tuner or VCR connected, no image may appear or a message of No Signal may appear on the screen when you change the channel via any channel that is not being received. In such a case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip function (that is a function not to display channels that are not being received) enabled

Connecting to a DVD player

To connect this projector to video equipment that has component video output terminals, such as a DVD player, use the COMPONENT terminals.

 

Cb/Pb

Y

Cr/Pr

Component cable (Option)

 

 

 

DVI

 

 

 

 

VIDEO

 

G(Y)

B(Cb/Pb)

R(Cr/Pr)

H/HV

V

 

 

RS-232C

S-VIDEO

 

CR(PR) CB(PB) Y

DVD player

 

Audio cable (Option)

To audio output

To audio input

terminal

terminal

Y CB(PB) CR(PR)

BNC-RCAconnector (Option)

 

 

 

DVI

 

Y

Cb/Pb

Cr/Pr

 

VIDEO

G(Y)

B(Cb/Pb)

R(Cr/Pr)

H/HV

V

 

 

RS-232C S-VIDEO

G(Y)

 

 

 

B(Cb/Pb)

 

 

 

R(Cr/Pr)

 

 

 

 

G B R

Cable with BNC connector (Option)

Select this connection when using long cable.

Images may not be projected correctly depending on the type of the DVD player you use.

Though it may take some time before an image is displayed on the screen depending on the type of the input signal, such symptom is not a malfunction.

EN-14

Page 14
Image 14
Mitsubishi Electronics HC2000 user manual Viewing video images, Connecting the projector to video equipment, EN-14