Mitsubishi Electronics HC6000 Connecting to video equipment having a HDMI terminal, EN-16

Viewing video images (continued)

Connecting to video equipment having a HDMI terminal

You can project high-quality images by connecting the HDMI IN terminal of this projector to video equipment having a HDMI output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are output from DVD players.

•Select HDMI as the input source.

•HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital video data for the purpose of copy protection.

•HDMI (High-Definition Multimedia Interface) is fully backward compatible with computers, displays and consumer electronics devices incorporating the DVI standards.

•This projector can be linked with video devices equipped with HDMI output terminal. However, with some of them, this projector may not display any image or not operate correctly.

•If this projector doesn’t display any image or not operate correctly, see the operation manual of the video device for its connection.

•When you use the video equipment other than HDMI conformity product, the image may not be projected properly.

•Use of a long cable may decrease the quality of projected images.

Connection (for video equipment having an HDMI terminal)

•Use a commercially available HDMI (with HDMI logo) cable.

•Some cables may not be connected correctly depending on the size and shape of their connectors.

Equipment having an HDMI terminal

Audio cable (option)
To audio output	To audio input
terminals	terminals

To HDMI terminal

	HDMI IN-1	HDMI	-2
PB/	COMPUTER IN/		SERIAL	TRIGGER
	COMPONENT
CB
	VIDEO IN
VIDEO IN
PR/
CR
S-VIDEO
IN
COMPONENT
VIDEO IN

AC IN

To HDMI IN-1 or HDMI IN-2 terminal

HDMI (with HDMI logo) cable (option)

When you connect this projector and a Digital device (such as a DVD player) via the HDMI terminal, black color may appear dark and deep, depending on the type of the connected device.

•This depends on the black level setting of the connected device. There are two kinds of methods to digitally transfer image data, in which different black level settings are employed respectively. Therefore, the specifications of the signals output from DVD players differ, depending on the type of the digital data transfer method they use.

•Some DVD players are provided with a function to switch the methods to output digital signals. When your DVD player is provided with such function, set it as follows.

EXPAND or ENHANCED J NORMAL

• See the users guide of your DVD player for details.

•Set INPUT LEVEL of ADVANCED MENU in the IMAGE menu depending on the device to be used.

EN-16