Mitsubishi Electronics HC6000 user manual Menu operation continued, EN-27, INSTALLATION menu

Menu operation (continued)

2. INSTALLATION menu

opt.
INSTALLATION	AV MEMORY 1
KEYSTONE	0
LAMP MODE	STANDARD
AUTO POWER	OFF
ON
AUTO POWER	OFF
OFF
SPLASH	ON
ON
SCREEN
BACK COLOR	BLUE
IMAGE	OFF
REVERSE
TRIGGER OUT	OFF
TEST PATTERN	CROSS HATCH
LENS LOCK	OK

2. INSTALLATION menu
ITEM	SETTING	FUNCTION
KEYSTONE	±15	Use to correct vertical keystone distortion.
LAMP MODE	STANDARD	Select this option when you want to view images in a well-lit room.
	LOW	Select to moderate the intensity of the lamp. The fan operating sound is
		reduced and the lamp lifetime becomes longer.
AUTO POWER ON	ON / OFF	When ON is chosen, the lamp is automatically lit when the power cord is
		plugged in the wall outlet. Choose ON when using the projector mounted on
		the ceiling.
		• The projector is in the stand-by mode when the lamp is off. Use the remote
		control to turn on the lamp.
AUTO POWER OFF	OFF / 5 - 60min	Use to set the time elapsed before the projector enters the stand-by mode
		when there is no signal input from the source.
SPLASH SCREEN	ON / OFF	Choose ON to display the splash screen when the power is turned on.
BACK COLOR	BLUE / BLACK	Use to change the color of the screen that appears when no signal is supplied.
IMAGE REVERSE	OFF	Select when viewing images from the front with the projector installed on the
		floor.
	MIRROR	Select when viewing images projected from the behind of the screen with the
		projector installed on the floor.
	INVERT	Select when viewing images projected from the behind of the screen with the
		projector installed on the ceiling.
	MIRROR INVERT	Select when viewing images from the front with the projector installed on the
		ceiling.
TRIGGER OUT	ON / OFF	Choose ON to output the trigger output signal (12 V) from the TRIGGER
		terminal when the lamp illuminates.
TEST PATTERN CROSS HATCH		Select to show the test cross hatch pattern.
	WHITE	Select to show the maximum brightness image.
	BLACK	Select to show the minimum brightness image.
LENS LOCK	ZOOM/FOCUS LOCK	Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
	LENS SHIFT LOCK	Use to enable or cancel the LENS SHIFT LOCK.
	LENS SHIFT RESET	Use to reset the position of the lens to the factory setting.

•When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after turn-on.

•When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.

•Do not change the setting of LAMP MODE frequently.

•To cancel the test pattern, press any button.

EN-27