Mitsubishi Electronics HC6000 user manual Feature menu

Menu operation (continued)

3. FEATURE menu

	opt.
FEATURE		AV MEMORY 1
	ASPECT	AUTO
	PASSWORD	DISPLAY
	FUNCTION	INPUT
	MENU POSITION	1.
	MENU DIMMER	OFF
	CINEMA MODE	AUTO
?	VIDEO SIGNAL	AUTO
	SETUP	AUTO
	SCART INPUT	OFF
A Ë	LANGUAGE	English
	RESET ALL	OK

3. FEATURE menu
ITEM	SETTING	FUNCTION
ASPECT	AUTO	Select to change the aspect ratio automatically depending on the input signal.
	4:3	Select to project images with an aspect ratio of 4:3.
	16:9	Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
	ZOOM1	Select to enlarge and project images of CinemaScope size.
	ZOOM2	Select to enlarge and project images of Vista size.
	STRETCH	Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.
		(Non-linearly stretched.)
PASSWORD FUNCTION		Use to enable or cancel the password lock. See page 35 for details.
MENU POSITION	2 options	Use to change the position of the menu.
MENU DIMMER	ON / OFF	Use to reduce the brightness of the menu.
CINEMA MODE	AUTO	The film mode will be automatically activated when a film source signal is input.
		Select AUTO for normal use.
		When flicker occurs on the screen or jaggies on slanting lines are remarkable,
		select FILM when a film source signal is input or select VIDEO for other signals.
	VIDEO	The film mode will not be activated.
	FILM	Fixed to the film mode.
VIDEO SIGNAL	8 options	When AUTO is selected, the appropriate video format is automatically selected
		depending on the input signal. If the image isn’t displayed correctly, select the
		desired video format manually.
SETUP	AUTO	Select AUTO for normal use. When LANGUAGE is not set to	and 480i,
		480p or TV60 signal is input, the SETUP changes to 7.5% automatically.
	OFF	Select to make black lighter.
	3.75% / 7.5%	Select to make black intense.
		• When 7.5% is chosen, the brightness is decreased by the set-up cancel
		function for the U.S. Choose OFF when the image is dark.
SCART INPUT	ON / OFF	Choose ON when connecting the projector with a device equipped with the
		SCART terminal that can output RGB signal. SCART terminal is used mainly
		in Europe. Choose OFF normally. (Available only for the input signal from the
		COMPUTER IN/COMPONENT VIDEO IN terminal.)
LANGUAGE	10 languages	Use to select the language used in the menus.
RESET ALL	OK	Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
		LANGUAGE) to the factory setting values.

•When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE(2.35:1) in the IMAGE menu, STRETCH cannot be selected for ASPECT.

•When SCART INPUT is set to ON, normal computer signals aren’t projected.

•Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

•It may take a little while to carry out RESET ALL in the FEATURE menu.

EN-28