Setting Up Your VCR
Adding and Deleting Channels
If necessary, you can manually add or delete channels after you have completed the automatic channel memorizing.
1Make sure that video mute is ON. See page 42.
2Set the VCRÕs input to Tuner. To do this, press INPUT on the remote control until a channel number appears on the screen.
3Press MENU on the remote control. VCR Main Menu appears.
4Press the ADJUST buttons on the remote control to select First Time
5You will see the First Time
IMPORTANT
If you are playing back a tape or receiving a video signal from an external input, then Not available will flash on- screen. To correct this, stop the tape or turn off the menus and switch the VCRÕs input to tuner.
6You will see the screen for adding or deleting channels. Use the ADJUST buttons to select the channel that you want to add or delete. Press ENTER to add the channel; press CANCEL to delete it.
7When you are finished adding or deleting channels, press MENU three times to exit the menus.
IMPORTANT
If you use automatic memorizing again, you will lose all of the manual changes you made. All of the channels you deleted will be added; all of the channels you added will be deleted.
Selecting a Channel
Now that you have memorized channels, and added or deleted some, you will want to be able to select channels. If you have not yet memorized channels, see page 13, Memorizing Channels
Automatically. |
|
Antenna/Cable selections | Your VCR can receive |
indoor/outdoor antenna | VHF/UHF channels 2Ð69 |
cable antenna | cable channels 1Ð125 |
If you try to select a channel number that the VCR cannot receive, the VCR will not change channels.
selecting channels sequentially
Press CHANNEL on the remote control or on the VCR front panel. This will cycle through the channels in sequential numerical order.
selecting channels directly
Use the number buttons on the remote control. For example, to choose channel 23, press
To select a single digit channel, such as channel 5; press 5. You can also press 5, then press ENTER.
ÄFirst Time
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÇAdd/delete channels
Channel 39
Not in memory
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to add
· ¹¹ADJUST to select
14
