Timer Recording
5The hour numbers of the start time will flash. Press the ADJUST buttons to set the hour when recording is to start. Press ENTER.
6The minute numbers of the start time will flash. Press the ADJUST buttons to set the minutes when recording is to start. Press ENTER.
7Set the stop time the same way as the start time, using steps 5 and 6.
8Press the ADJUST buttons to set the recording speed: SP = standard play; EP = extended play; AUTO = auto. Auto speed programming is discussed on page 30. Press
ENTER.
IMPORTANT
If you press ENTER when you set the timer recording incompletely, Current program is not completed will appear on your screen.
If two programmed recording times overlap, VCR is already programmed for that time will display on your screen for about 3 seconds, and then the Recap screen will appear. The program you have just set will be highlighted in magenta color and flash for 3 seconds. The start and stop time of the overlapped program will be highlighted in cyan color. You will need to erase one of them.
9The programmed memory will appear on the Recap screen.
10To program additional recording times, select an empty program line by pressing ADJUST buttons. Press ENTER. The Program to record menu will appear. Continue the programming procedure from step 3.
11When you are finished with all programming, check the following:
¥If you have a cable box, leave the cable box turned ON and tuned to the station you wish to record. Additionally, if you are using an A/B switch, remember to set the switch to the correct position.
¥Turn the VCR power OFF and make sure the programmed recording light is lit.
IMPORTANT
When programmed recording of 4 and under are entered, only 4 of the 8 program lines appear on the Recap screen at any one time. To see additional program lines, press the ADJUST buttons to scroll the lines on the screen.
Canceling a recording in progress
There are two ways to cancel a recording in progress:
Press STOP. The recording stops, but the program is not cancelled. Therefore, if you press REC, the recording will start again.
Press POWER on the front panel. The recording stops and the program is cancelled.
ÂProgram to record
ÄChannel | 2 | |
ÄDay | Monday 11 | |
ÄStart time |
| 11:00am |
ÄStop time |
| |
ÄRecord speed | AUTO | |
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to record
ÄChannel | 2 | |
ÄDay |
| Monday 11 |
ÄStart time | 11:30am | |
ÄStop time | 1:30pm | |
ÄRecord speed | SP | |
º¹MENU to go back | ||
| ||
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to record
| CH | DAY | ON | OFF |
10 | TH14 | 9:00pm | 10:30pm SP | |
¤ | 2 | MO11 | 11:30am | 1:30pm SP |
| ||||
|
| º¹MENU to go | back | |
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
Recap screen
Programming not cancelled
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | STOP |
| 0 | STOP |
Programming cancelled
POWER
27
