Mitsubishi Electronics HS-U748 manual Location of Controls Front Panel Display, Rear Panel Jacks

Location of Controls

Front Panel Display

PWR. REC

VCR

PM

POWER light : PWR.

Is lit when power is ON.

VCR light : VCR

Indicates that the picture is controlled by the VCR.

Cassette light :

Lights up when a tape is in the VCR.

time display

This area displays:

¥current time

¥OTR and OTR2 timer

Record light : REC

Lights up when the VCR is recording. Flashes when the VCR is in recording pause mode.

Programmed recording light :

Lights up when VCR is off and it is programmed to record.

PM light : PM

Lights up when the current time or start time of OTR2 is in the afternoon.

Turns off when it is in the morning.

Rear Panel Jacks

	AUDIO		ANTENNA
	OUT	IN 1
	R	R
	L	L/MONO	IN
S-VIDEO
OUT	IN 1		OUT
	VIDEO
			TIMER
			RESET
	OUT	IN 1

AUDIO INput and OUTput jacks

Red and white jacks for receiving (IN) and sending (OUT) audio signals. Red signifies the right channel, and white signifies the left channel. Stereo audio cables are also color coded red and white. If you are receiving or sending a mono (non-stereo) signal, you should use only the left (white) terminal.

VIDEO INput and OUTput jacks

Yellow jacks for receiving (IN) and sending (OUT) video signals to a monitor TV or from another VCR. The black jacks marked with ÒS-VIDEOÓ can be used to connect televisions with S-Video jacks. (ÒS-Video jackÓ refers to a Separated Luminance-Chrominance (Y/C) jacks that conforms to the NTSC signal.)

TIMER RESET

Erases all programmed recording settings and resets the clock. Use this button with care.

ANTENNA IN jack

Attach an external antenna or cable to bring in an outside signal.

ANTENNA OUT jack

Attach a coaxial cable to your TV to send out antenna/cable signals from the VCR to your TV.

49