33

1Connect the audio cable to AUDIO OUT L
and R on the playback VCR and to AUDIO
IN L and R on the HS-U748. If the playback
VCR is mono, use only the AUDIO IN L on
the HS-U748.
2If the playback VCR is S-VHS, connect an
S-video cable to S-VIDEO OUT on the
playback VCR and to the S-VIDEO IN on
the HS-U748 rear panel.
If the playback VCR is standard VHS,
connect a video cable to VIDEO OUT on the
playback VCR and to the VIDEO IN on the
HS-U748.
3If the playback VCR is Hi-Fi, set the audio
monitor to Stereo.
4Use INPUT to set the HS-U748 to External
L1 if you used the HS-U748 rear panel jacks,
or External L2 if you used the HS-U748
front panel jacks.

Using Two VCRs to Copy

There are two basic ways to make a copy of a tape.
One way is to use the HS-U748 to record and another VCR for playback.
The other way is to use another VCR to record and use the HS-U748 for playback.
Regardless of which method you may choose, you will need one RCA audio cable and one S-video cable
to connect the two VCRs. You can use either a standard RCA video cable or an S-video cable. If you do
not have these cables, they are available at your local electronics dealer. The highest quality is achieved
through an S-video cable.
AUDIO
VIDEO
R
L/MONO
IN
1
IN
1
S-VIDEO
IN
1
L
RLR
PLAYBACK
RECORDING
AUDIO IN 1 L/MONO
AUDIO IN 1 R
S-VIDEO IN 1
AUDIO OUT R
S-VIDEO OUT
AUDIO OUT L
VIDEO OUT
VIDEO IN 1
HS-U748

Using the HS-U748 to record from another VCR

Editing Features
5Put a blank tape into the HS-U748. If you are
recording in S-VHS, be sure to use an S-VHS
tape.
Make sure that the S-VHS Auto record or
S-ET record in the S-VHS Set-Up menu is
set correctly. See page 21, Selecting
Recording format.
If you connect playback VCR to the HS-U748
rear panel, make sure that the Rear S-input
in the S-VHS Set-Up menu is set correctly.
See page 22, Selecting S-input Setting.
6Put the tape you want to copy into the
playback VCR and find the cue point. Press
STOP if the picture starts playing.
7On the HS-U748, press REC, then PAUSE.
8On the playback VCR, press PLAY, then
PAUSE.
9Press the PAUSE buttons on both VCRs at
the same time to begin copying the tape.
10 When finished, press STOP on both VCRs.