Timer Recording
Auto speed programming
Use auto speed programming if you want to record as much of the program as possible in standard play (SP) speed, but you want the VCR to automatically switch to extended play (EP) if there is not enough tape left.
Auto speed programming is only available for one program. In the first slot, the recording speed default is AUTO.
Make sure that the Tape video function matches the length of tape you are using. See Selecting and adjusting the audio and video functions on page 25.
At the point where the recording mode changes from standard play (SP) to extended play (EP), some noise may be in the picture or sound when playing the tape.
Program caution
If your VCR is set to record, but the power is still ON within 3 minutes before timer recording starts, this screen will appear to remind you to turn off the VCR.
If the VCR is still turned on 12 seconds before the start time of the recording, that timer recording will be cancelled.
TV programs that end on the day after
If you want to start the recording at 11:00 PM and end it at 2:00 AM the next day, simply set the start time to 11:00 PM on the recording start day and the end time to 2:00 AM. There is no need to change the day of the week.
program caution
REC in 3 min
Turn off VCR
Program skip using menus
Sometimes you may want to skip one day of a timer recording but do not want to erase it. Program skip will prevent the recording, for that day only, of a program you have scheduled to record every day or every week.
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear. Press the ADJUST buttons to select Program to record. Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press the ADJUST buttons to place the cursor arrow next to the program you wish to skip.
3Press STOP. The cursor arrow will change to a 
.
4Press MENU twice to exit the menus.
To resume recording every day or every week, change the 
to the cursor arrow by following steps 1 to 4 again.
ÂProgram to record
CH | DAY | ON | OFF |
2 | MO11 11:30am | 1:30pm SP | |
10 | TH14 | 9:00pm | 10:00pm EP |
¤2
Use STOP to skip | on/off |
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to record
CH | DAY | ON | OFF |
2 | MO11 11:30am | 1:30pm SP | |
10 | TH14 | 9:00pm | 10:00pm EP |
X2
Use STOP to skip on/off
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
30
