Mitsubishi Electronics L75-A91, L75A81 Basic TV Operation, Selecting an Input to Watch, Cancel

141. Basic Setup and Operation

Basic TV Operation

Selecting an Input to Watch

1.Press ACTIVITY.

2.Press and to highlight an input.

3.Press ENTER to switch to the input.

Watching Broadcast TV

TV Connected to an Antenna, Direct Cable, Cable Box, Set-Top Box, or Satellite Receiver

1.Press ACTIVITY.

2.Press and to select a broadcast source. If you named devices during Auto Input Sensing, select an input from the Watch TV group. Note: Your TV may have only one group (Watch TV).

Note: For more about the Activity menu, see page 25.

Activity menu, antenna input selected

3.Tune to a channel on the ANT input using any of these methods.

•Enter the channel number using the number keys on the remote control and press ENTER.

For a two-part digital channel, such as 3-1,

press 3 — 1 to enter a dash (separator).

CANCEL

•Press CHANNEL UP /CHANNEL DN (+/–) to change channels one channel at a time.

•Press (LAST) to switch back to the previ- ously tuned channel.

•Antenna or Direct Cable Only. Press GUIDE to display ChannelView channel listings, highlight a channel number, and press ENTER to tune.

Note: Program information is provided by broadcasters and may not be available in all areas.

Watching DVDs or Videos

TV Connected to a DVD Player, DVR, or VCR

Press ACTIVITY and select a movie source from the Activity menu. If you named devices during Auto Input Sensing, select the input from the Watch Movie group.

Activity menu, DVD input selected

In Canada call 1(800) 450-6487 for assistance.