Mitsubishi Electronics L75-A91, L75A81 manual Receiver with Hdmi Output, DVD player

242. TV Connections

A/V Receiver

Most setups require either a digital audio cable or analog stereo audio cables. To send audio from TV channels received on the ANT input or devices con- nected directly to the TV, you must use one of the connections shown below. Usually, only one of these connections is required.

The TV makes all audio available in digital and analog formats:

•Analog audio coming into the TV is available as output in digital stereo format on the DIGITAL AUDIO OUTPUT jack.

•Digital incoming audio is available as analog output on the AVR AUDIO OUTPUT L and R jacks.

	Digital coaxial
	cable (for a digital
1	A/V receiver)

A/V Receiver with HDMI Output

Required: One HDMI-to-HDMI cable

Optional: One digital coaxial audio cable or analog stereo audio cables

This option allows you to view content from devices connected to an A/V receiver. The A/V receiver can send audio and video to the TV over a single HDMI cable.

• In addition to the HDMI connection, you can use

an audio connection from one of the TV’s audio

outputs. The optional audio connection allows you

to hear, through the A/V receiver, devices con-

nected to the TV only, e.g., an antenna on the ANT

input.

• You may be able to use the TV’s remote control (in

TV mode) to operate connected CEC-enabled HDMI

devices. See Appendix C, page 73.

• L75-A91.This setup allows you to use NetCom-

mand-controlled audio and video switching over the

HDMI cable. See “Case 3: Automatic Audio and

Video Switching via HDMI” on page 60.

• L75-A91.To use NetCommand to supplement

234 HDMI

R L Y/ VIDEO Pb Pr

Controller	IR-
Output/External Input
	NetCommand

RS-232C

OUTPUT	DIGITAL
AUDIO

OUTPUT	DIGITAL
AUDIO

DVI/PC
R
INPUT
L	TV
AVR
R
AUDIO
OUTPUT
L

INPUT 1	INPUT 2
	GLASSES EMITTER
	3D
	AVR
	R
	AUDIO	ANT
	OUTPUT
	L

OPTICAL

INPUT

COAXIAL

INPUT

HDMI control of a CEC-enabled A/V receiver, note

the recommendations under “More About Using an

HDMI Connection,” page 60.

	VCR
Cable box	Any connec-
	tion types
DVD player	(can be HD or
	SD video)
HDMI	DIGITAL	AUDIO
OUT	AUDIO IN	IN

A/V receiver

Stereo analog cables (for an analog A/V receiver)

A/V receiver back panel

1
2	RS-232C
HDMI

with HDMI output

HDMI cable

Note:

• On rare occasions, an HDMI signal may be

copy-restricted and cannot be output from

the TV as a digital signal. To hear these copy-

3

4

or

protected signals through the A/V receiver, use

the connection for an analog A/V receiver.

• Check the A/V receiver’s Owner’s Guide for

information concerning use of the digital input

and switching between digital sound and

analog stereo sound from the TV.

In Canada call 1(800) 450-6487 for assistance.

		R
		L
		Y/ VIDEO
		Pb
		Pr
Controller	IR-	INPUT 1	INPUT 2
Output/External Input			GLASSES EMITTER
	NetCommand
			3D

OUTPUT	DIGITAL
AUDIO

DVI/PC INPUT AVR AUDIO OUTPUT

R L R LANT

OUTPUT	DIGITAL
AUDIO

	R
	L
	Optional audio
TV	connection
	(analog or digital)