Mitsubishi Electronics L75-A94 manual Inputs and Outputs, R Input 1 and Input 2 audio, ANT Antenna

141. Additional TV Features

Inputs and Outputs, continued

HDMI Cable Categories

HDMI cables are available as Standard and High-Speed types.

•High-Speed HDMI Cables. Blu-ray players, newer DVD players, video games, 3D content, and set-top boxes require High-Speed HDMI cables, suitable for clock frequencies up to 340 MHz or data rates of up to 10.2 gigabits per second. Use high-speed cables for 1080p HD signals carrying extended color encodings (i.e., 30 or more bits, also called Deep Color). High-Speed HDMI cables are also suitable for standard HDTV signals.

•Standard HDMI Cables. Standard HDMI cables may be unmarked. They are suitable for standard HDTV 720p, 1080i, and 1080p signals with 8-bit color depth. Use Standard HDMI cables for clock fre- quencies up to 74.25 MHz or data rates of up to 2.23 gigabits per second.

5. DIGITAL AUDIO OUTPUT

This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Incoming analog audio is converted by the TV to PCM digital audio. If you have a digital A/V receiver, this is the only audio connection needed between the TV and your A/V receiver.

6. DVI/PC INPUT

Connect a DVI device to one of the TV’s HDMI inputs and use this jack to send analog audio to the TV.

7. AVR AUDIO OUTPUT

Sends analog audio of the current program to an analog A/V surround sound receiver or stereo system. Digital audio from digital channels and HDMI devices is converted to analog audio by the TV for output on this jack. This is the only audio connection needed to the TV if using an analog A/V receiver or stereo system.

Note: If connecting headphones, set Sound > Global > Analog Audio Out to Variable.

8. L/R (INPUT 1 and INPUT 2 audio)

Analog stereo inputs for use in conjunction with adja- cent composite or component video jacks.

9. Y/VIDEO (Composite Video)

Analog standard-definition video inputs. Use the adja- cent R and L inputs if you wish to send audio to the TV speakers.

10. Y/VIDEO Pb Pr (Component Video)

Analog video inputs able to accept high-definition video from a high-definition source device. Use the adja- cent R and L inputs if you wish to send audio to the TV speakers.

11. EXTERNAL CONTROLLER INPUT

Accepts control signals from an external controller when set up by your professional installer. The control- ler should send electronic versions of remote control commands.

12. 3D GLASSES EMITTER

Use this jack for the special IR emitter supplied with some 3D glasses. The emitter sends out an infrared signal that synchronizes your 3D glasses with the screen display.

13. ANT (Antenna)

Connect your main antenna or direct cable service (without a cable box) to ANT. The ANT input can receive digital and analog over-the-air channels from

aVHF/UHF antenna or non-scrambled digital/analog cable source.

For assistance call 1(877) 675-2224