Mitsubishi Electronics L423FR, LT-4260 Connecting an Audio Receiver Directly to LCD Side Panel

Connecting an Audio Receiver Directly to LCD Side Panel

NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to the LCD Display.

Stereo Audio System

(recommended for shelf units or A/V receivers without digital audio inputs)

(Figure 2)

1.Connect the audio cables from AUDIO

OUT on the LCD Display side panel to TV IN or AUX IN terminals on the back of the audio system.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

2.Turn off the LCD Display speakers through the AUDIO/VIDEO SETTINGS Menu, page 52.

3.Set the audio system’s input to the TV or AUX position to hear the LCD Displays audio through a stereo system.

Additional connection cables are not provided with the TV. They should be available at most electronic stores.

����������������������

���

�

�����

�������������������������������

		��	���		������		������
�	�����	��	��	��	���	��	��� ���������
		�					���
							������
	���	�

Figure 2. Connecting the Stereo Audio System.

These types of audio connection do NOT support multi-channel digital audio. Please refer to your other devices Owner’s Guide to verify.

A/V Receiver			��������������������������������
			�
(Figure 3)			��� �����
1.	Connect either a video cable or a S-Video cable
	(but not both) from VIDEO MONITOR OUT
	on the back of the A/V receiver to VIDEO INPUT		����������������������
	on the LCD Display side panel.
		�	���
			�
2.	Connect a set of audio cables from AUDIO OUT
			�����

on the LCD Display side panel to AUDIO TV IN on the back of the A/V receiver.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

	������
	����
	���
	�����
������	����
�
�������

Figure 3. Connecting the A/V Receiver.

Note: Please see your A/V receiver Owner’s Guide for more detailed connections.

30