Mitsubishi Electronics LT-4260, L423FR manual Cleaning, Operating, Storage

CLEANING

Cleaning

Normally, light dusting with a dry, non-scratching duster will keep your product clean. If cleaning beyond this is needed, please use the following guidelines:

First, turn off the product and unplug the power cord from the power outlet.

Top and Sides of the Display:

•Gently wipe down your product with a soft, non- abrasive cloth such as cotton flannel or a clean cloth diaper, lightly moistened with water. Dry with a second dry, soft, non-abrasive cloth.

General Cleaning Warnings:

•DO NOT allow liquid to enter the product through the ventilation slots or any crevice.

•DO NOT use any strong or abrasive cleaners as these can scratch the surfaces.

•DO NOT use any commercial cleaners with ammonia, bleach, alcohol, benzine, or thinners as these can dull the surfaces.

•DO NOT spray liquids or cleaners directly on the product’s surfaces.

•DO NOT scrub or rub the product harshly. Wipe it gently.

•Excessive moisture or water may damage your product. Use caution when wiping your product.

DO NOT use any kind of abrasive or		For further information, please call
liquid cleaner on the surface of the TV		Consumer Relations at:
Display.	800-332-2119

ENVIRONMENTAL CONDITIONS

Operating

Temperature: 5 - 35 deg C

Humidity: 30 - 80% relative (without condensation)

Storage

Temperature: 20 - 50 deg C

Humidity: 10 - 90% relative (without condensation)

7