Troubleshooting |
|
| ||
Problem | Possible Solution | |||
| • | The TV remote control does not work. | • | Check that the batteries are installed correctly. |
|
|
| • | Check that the selected switch is set to “TV”. |
|
|
| • | Be no further than 20 feet from the TV when using the remote control. |
|
|
| • | Avoid using under or near strong fluorescent lighting. |
|
|
|
|
|
| • | • | This is part of normal TV operation. | |
|
|
| ||
| • There is no sound even when the volume is turned up. | • Check to see if the MUTE button is on. | ||
|
|
| • | Check that “TV Speakers” setting is On. |
| • Power is suddenly turned off. | • Check SLEEP TIMER and PC Power Save settings. | ||
|
|
|
|
|
| • | The sound does not match the screen picture. | • | If using stereo or A/V reveiver speakers, check input selection on the |
|
|
|
| stereo or A/V receiver. |
|
|
| • If using stereo or A/V receiver, check that AUDIO is from AUDIO | |
|
|
|
| OUT on TV’s side panel. |
| • | Picture is out of focus, or colors are not aligned. | • Check the Sharpness, ColorView, and input signal settings (page 50). | |
| • You cannot see a picture when you play a VCR tape. | • If you connected your VCR with A/V cables, use the DEVICE button | ||
|
|
|
| to select the Input source (INPUT) that the VCR is connected to. |
|
|
| • | Check your VCRs owner’s guide for further troubleshooting. |
| • | Cannot set adjustments to factory setting | • | Follow the steps below to reset system defaults to factory settings. |
|
|
| 1. Press the TV MENU button followed by number buttons 1,2,and 3 on | |
|
|
|
| the remote control. |
|
|
|
| Result: The above steps activate the Reset System Defaults menu screen |
|
|
| 2. Press the ENTER button on the remote control. | |
|
|
|
| Result : The settings reset to factory defaults. |
|
|
| 3. Press the HOME or TV MENU button on the remote control to | |
|
|
|
| return to the HOME or TV MENU screeen. |
|
|
|
| IMPORTANT: This function is not recommended unless it is mandatory |
|
|
|
| to reset system defaults to factory settings. This operation CANNOT be |
|
|
|
| undone and all customs settings will be erased. |
69
