Mitsubishi Electronics L423FR, LT-4260 manual Stand Alone Configuration Setup

LCD Display Side Panel

Stand Alone Configuration Setup (continued)

7. Connect the AC Power Cord from the back of the HD-6000 to the back of the LCD Display.

HD-6000 Back Panel (section detail) LCD Display Back Panel (section detail)

8.Connecting a Computer (OPTIONAL)

•Your Mitsubishi LCD display supports VGA, SVGA, XGA, and WXGA PC resolutions only.

See Appendix B: Supported PC Resolutions, P. 61

a.Connect a Mini D-sub 15-pin (RGB) cable from the LCD Display back panel to PC or Macintosh® back panel.

b.Connect a PC Audio Cable (or 1/8” stereo

mini jack cable) from the LCD Display side panel to PC or Macintosh back panel.

When connecting a PC to the LCD Television System, connect the PC directly to the LCD display. Do not connect the PC to the HD-6000.

LCD Display Back Panel (section detail)

to PC or Macintosh® back panel

�

�

to PC or Macintosh® back panel

Figure 7. Connecting Computer

9.Refer to Chapter 2 (in the HD-6000 Owner's Guide) on how to connect A/V equipment (DVD player, Cable Box, etc) to the back panel of the HD-6000.

10.Refer to HD-6000 Owner's Guide for complete operating instructions. The HD-6000 controls all features that the LCD HDTV system has to offer.

22