Mitsubishi Electronics L423FR, LT-4260 AUDIO/VIDEO Setting Descriptions Video, Video Settings

AUDIO/VIDEO Setting Descriptions: Video

Video Settings

NOTE: A slider will display on-screen for each setting.

The slider has a numeric value, where 63 is the maximum, the mid-range is 31 and the minimum setting is 0.

When the LCD Display is used together with the HD-6000, the A/V Settings described below will be controlled by the HD-6000 except where noted.

Contrast

Provides a slider to adjust the white-to-black level. Low contrast shows a variety of shades in darker images, while high contrast shows darker images more uniformly black and makes colors appear more vibrant.

Brightness

Provides a slider to adjust the overall brightness of the picture.

Sharpness1

Provides a slider to adjust the detail and clarity.

Color1

Provides a slider to adjust the color intensity.

Tint1

Provides a slider to adjust the proportion of red to green.

Color Temp (Color Temperature)

Film Mode (Auto)

Video media uses a video camera created at 30 frames per second. Film media uses a film camera created at 24 frames per second. Examples of video media are live TV broadcast such as news, special events, or video taped programs. Examples of film media are motion pictures, made-for-TV movies, and many prime time programs. Filmed media is converted by the broadcaster or home video company to 30 frames per second to match TV or video standards. This conversion can leave subtle “picture artifacts” or conversion errors.

The settings are On and Off. If you select On, the system automatically detects if the signal source is Film and corrects for conversion errors. If you select Off, the system will never correct for conversion errors.

This function operates only in 480i mode.

Back Light

Provides a slider to adjust the LCD Display illumination. A lower setting preserves the life of the backlight lamps.

Auto Position2

Automatically adjust V-Position, H-Position, Clock and Clock-phase. The whole process takes about 5 seconds.

H Position2

Provides a slider to center image by moving it to the left or right (available for PC input only).

V Position2

Provides a slider to center image by moving it up or

This Setting is not available when the HD-6000 is connected to the LCD Display.

Allows you to adjust how white images are displayed. Your choices are:

•Low: White images will have a warm cast to them. This adjustment is an average and can vary due to ambient room lighting, video scene brightness and the TV’s age.

•Medium: White images will be balanced between the Low (warm) and High (cool) settings.

•High: White images will have a cool cast to them. This setting may provide the most realistic picture under bright lighting.

Video Noise

Reduces minor noise (graininess) in the broadcast or input signal.

This function operates only in 480i mode.

down (available for PC input only).

Video Clock2

Provides a slider to adjust PC clock frequency.

Fine Detail2

Provides a slider to adjust PC image flicker (clock phase).

H Resolution2

Provides a slider to adjust PC horizontal size by increasing or decreasing the setting.

V Resolution2

Provides a slider to adjust PC vertical size by increasing or decreasing the setting.

NOTE: For optimal picture performance, it is recommended that you adjust your video settings (specifically contrast and brightness) during initial setup. Certain factors will affect your personal preferences, including room lighting, glare reflections and viewing angles/distance.

1 This setting is not available when the HD-6000 (SET TO	2 Available for PC Input only
PC INPUT) is connected to the LCD Display. This setting is	54
available for all other Inputs.