Mitsubishi Electronics WD-65736, WD-65835 18TV Connections, Before You Begin, Auto Input Sensing

18TV Connections

3. TV Connections 19

3

HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device)

Required: HDMI-to-HDMI cable.

Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and audio through the single cable.

DVI Video Device (Cable Box, Satellite Receiver, DVD Player, or Other Device)

Connect DVI devices (digital only) to the TV’s HDMI input jacks.

Analog stereo audio cables and a DVI-to-HDMI cable or DVI/HDMI adapter and HDMI cable are required.

Before You Begin

Auto Input Sensing

The TV’s Auto Input Sensing feature automatically rec- ognizes most connections and prompts you to identify the type of device connected. See chapter 2, “TV Setup,” for more on Auto Input Sensing.

Connection Types

Review the connection types available on your input devices and use connections that will give the best video quality. For example, choose HDMI over compo- nent video, and choose component video over S-video or composite video.

Picture Quality

For best picture quality, route signals directly from the input device to the TV; avoid routing video signals through an A/V receiver, for example.

Surround Sound

For best surround sound audio quality, route audio- signal cables or HDMI cables from the source device directly to your A/V receiver or sound system.

IMPORTANT

Accessory items such as cables, adapters, splitters, or combiners required for TV connections are not supplied with the TV. These items are available at many electronics stores.

Mitsubishi recommends you use category 2 (high- speed) HDMI cables to connect HDMI 1.3 source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color. See “HDMI Cable Categories,” page 10, for more on HDMI cable types.

3D

GLASSES

EMITTER

3

-

"6%*0

AVR

AUDIO

HDMI

OUTPUT

DVI/PC

INPUT

R AUDIO L

VIDEO

VIDEO: 480i/480p/720p/1080i/1080p

AUDIO: PCM STEREO

ANT 2 / AUX

R

AUDIO

L

Pb

Pr 2INPUT3

IR-NetCommand

PC: VGA, W-VGA, SVGA, W-SVGA,

"OZ )%.*

L

Y

XGA, W-ZGA, SXGA, 720p/ 1080p

Output / External

Controller Input

HDMI

ANT 1 / MAIN

R

INPUT

1

2

3

EFWJDF

Y/VIDEO

Pb

Pr

DIGITAL

R

AUDIO

L

(480i / 480p / 720p / 1080i)

S-VIDEO

INPUT 3

AUDIO

OUTPUT

57 CBDL QBOFM

Figure 2. Connecting an HDMI device.

Note: HDMI inputs arecertified for proper

1.Connect the DVI-to-HDMI cable (recommended) or HDMI cable with DVI/HDMI adapter from the DVI device’s back panel to the TV’s HDMI jack.

Note: If you are using a DVI/HDMI adapter, it is impor- tant to connect the adapter to the DVI device for best performance.

2.Connect a set of audio cables from AUDIO OUT on the DVI device back panel to the DVI/PC INPUT

AUDIO on the TV back panel. Connect the red cable to the R jack and the white cable to the L jack.

Note: The HDMI connection supports copy protection (HDCP).

Some devices require connection to an analog input first in order to view on-screen menus and to select DVI as the ouput. Please review your equipment instruc- tions for DVI connectivity and compatibility.

3D

GLASSES EMITTER

HDTV Cable Box or Satellite Receiver, DVD Player, or Other Device with Component Video

interoperability with other products certified by Simplay™.

DVI/PC INPUT
R	AUDIO	L



If your cable box or satellite receiver has an HDMI output, use the connections for HDMI devices described later in this chapter.

Required: RCA component video cables, left/right analog stereo audio cables.

1.	Connect RCA-type cables from the Y Pb Pr outputs
	on the device to the Y Pb Pr inputs on the TV back
	panel, matching the colored green, blue, and red
	connections.
2.	Connect left (white) and right (red) audio cables
	from the device to AUDIO L and R on the TV back
	panel.
3.	Cable Box or Satellite Receiver Only: Connect
	the cable from the outside cable or satellite service
	to CABLE IN or SATELLITE IN on the cable box or

3D

GLASSES EMITTER

Y/VIDEO Pb Pr

R AUDIO L (480i / 480p / 720p / 1080i)

AVR

AUDIO

HDMI

OUTPUT

DVI/PC

INPUT

R

AUDIO

L

VIDEO

VIDEO: 480i/480p/720p/1080i/1080p

AUDIO: PCM STEREO

L

R

AUDIO

L

3

IR-NetCommand

PC: VGA, W-VGA, SVGA, W-SVGA,

INPUT

XGA, W-ZGA, SXGA, 720p/ 1080p

Output / External

HDMI

ANT 2 / AUX

Pb

Pr

2

Controller Input

Y

ANT 1 / MAIN

R

INPUT

1

2

3

Y/VIDEO

Pb

Pr

DIGITAL

R

AUDIO

L

(480i / 480p / 720p / 1080i)

1

INPUT 3

INPUT

S-VIDEO

AUDIO

OUTPUT

57 CBDL QBOFM			
			 *ODPNJOH GSPN
			DBCMF TFSWJDF PS
			TBUFMMJUF EJTI

IMPORTANT

HDMI and Audio Signals

Digital Surround Sound: The TV’s HDMI inputs can receive digital stereo audio signals only. To hear digital surround sound from an HDMI device, connect the device’s HDMI or digital audio output directly to your A/V receiver. See the Owner’s Guides for those devices for instructions.

	ANT 2	AVR								HDMI
		AUDIO								VIDEO: 480i/480p/720p/1080i/1080p
		OUTPUT	DVI/PC INPUT			R AUDIO L	VIDEO
										AUDIO: PCM STEREO
		L	R	AUDIO	L			3	IR-NetCommand	PC: VGA, W-VGA, SVGA, W-SVGA,
								INPUT		XGA, W-ZGA, SXGA, 720p/ 1080p
									Output / External
					Y	Pb		Pr	Controller Input	HDMI
	ANT 1							2
		R						INPUT	1	2	3
					Y/VIDEO	Pb	Pr
		DIGITAL		R AUDIO	L	(480i / 480p / 720p / 1080i)		1	INPUT 3
								INPUT
									S-VIDEO
		AUDIO
		OUTPUT
		57 CBDL QBOFM
										
%JHJUBM %7*
	EFWJDF

3	-	%7* 065
"6%*0

satellite receiver. See your device’s owner’s guide

for instructions and cable compatibility.

Note: To hear digital surround sound, connect the digital audio output from the device directly to your digital A/V receiver.

-	3	:	1C 1S
"6%*0			$"#-& */ PS
$PNQPOFOU WJEFP
			4"5&--*5& */
EFWJDF

Figure 3. Connecting a digital DVI device

Figure 1. Connecting a device with component video outputs