243. TV Connections
TV Operation and Features | 25 |
|
Camcorder
Inputs on the front of the TV (INPUT 4) offer the most convenient way to connect a camcorder, although you can use jacks located on the back panel instead. Three different connection options are described on this page.
B: Composite Video Connection
Required: Composite video and analog stereo audio cables supplied with the camcorder.
1. Connect the composite video cable from VIDEO |
4 |
Use jacks on the TV front panel to connect a camcorder
A: Y Pb Pr Component Video Connection
Required: Component video and analog stereo audio cables supplied with the camcorder.
1.Connect component video cables from VIDEO OUT on the camcorder to the TV’s Y Pb Pr component jacks on the front panel.
2.Connect left (white) and right (red) audio cables from AUDIO OUT on the camcorder to AUDIO L and R on the TV.
"$PNQPOFOU | ||
WJEFPQMVTBVEJP |
OUT on the camcorder to VIDEO/Y on the front of |
the TV. |
2. Connect left (white) and right (red) audio cables |
from AUDIO OUT on the camcorder to AUDIO L and |
R on the front of the TV. |
C: HDMI Connection
Required: HDMI cable supplied with the camcorder.
736 and 835 series models. Connect the camcorder to the TV’s HDMI jack on the front panel.
Audio-Only Device
If you wish to connect an
1.Insert an unused
2.Connect left (white) and right (red) audio cables from AUDIO OUT on the device to AUDIO L and R on the TV.
3.Keep the connector in the VIDEO/Y jack while using the
Choosing a Viewing Source
Input Selection menu
Choose a viewing source from the Input Selection menu. The current TV input appears as a
1.Press INPUT to display the Input Selection menu. If there are only two inputs to the TV, INPUT switches between them without displaying the menu.
2. Highlight an input icon using | . |
3.Press ENTER to switch to the input and close the menu.
More About the Input Selection Menu
•To assign meaningful names to the icons, see the
Inputs > Name menu, page 47.
•To rearrange the icons, see the Inputs > Order menu, page 47.
Sleep Timer
The Sleep Timer turns the TV off after the length of time you set. To set the TV to turn on at a certain time, see the Setup > Timer menu on page 45.
Setting the Sleep Timer
1.Press SLEEP on the remote control.
2.Press SLEEP additional times to increase the time in
3.Press EXIT or wait five seconds without pressing any keys for the message to disappear.
4.Press SLEEP to view the time remaining before the sleep timer turns off the TV.
Cancelling the Sleep Timer
1.Press SLEEP to display the
2.Press SLEEP repeatedly until OFF is displayed.
Note: After five seconds of inactivity, the message box will disappear.
TV Tips
Changing Channels (antenna sources)
| Pr |
| ||
57 |
|
|
|
|
|
| I |
|
|
|
| N |
| USB |
|
| U |
| |
|
| P |
|
|
|
| T |
|
|
Pr | 4 |
|
| |
| DVI AUDIO | HDMI 4 | ||
|
|
|
| 57GSPOUQBOFM |
HDMI 4 | |
|
#$PNQPTJUFWJEFP $)%.*BVEJPWJEFP
QMVTBVEJP)%.*PGGFSFEPO BOETFSJFTNPEFMT
Figure 13. INPUT 4 on the front of the TV offers up to 3 connection options for a camcorder.
| I |
|
57 | N |
|
T |
| |
| P | USB |
| U | |
Pr 4 | HDMI 4 | |
| DVI AUDIO |
57GSPOUQBOFM
"VEJPPOMZEFWJDF
Figure 14. First insert an unused
Turning the TV On or Off
To turn the TV on or off, point the remote control at the front of the TV and press the POWER button. Alterna- tively, press the POWER button on the control panel of the TV.
If You Turn Off the TV by Mistake
1.Press POWER again within about 60 seconds (while the lamp is still hot) to have the TV come back on immediately.
2.If the LAMP indicator starts blinking (about 60 seconds after you shut off power), wait a few moments for the LAMP indicator to stop blinking and press POWER to turn the TV on again.
Controlling Sound Volume
•Press VOL / to adjust the sound level.
•See also “Controlling A/V Receiver Sound Volume” on page 14.
To change channels:
• Enter the channel number using the number keys on the remote control and press ENTER. For a two-
part digital channel, such as
CANCEL
to enter a dash (separator).
• | Press CH/PAGE | / to change channels one |
| channel at a time. | |
• | Press and hold | CH/PAGE / to move quickly |
| through channels. |
•Press QV (QuickView) to switch back to the previ- ously tuned channel.
•Press GUIDE to display ChannelView channel listings, highlight a channel, and press ENTER to select.
•Use the Fav (Favorites) feature to set up lists of favorite channels and tune to them with the FAV key. See Setup > Edit > Fav
NOTE: Perform channel memorization to make finding channels easier. See Setup > Scan, page 42.