Mitsubishi Electronics WD-65835 Appendix A Specifications, Appendix B Bypassing the Parental Lock

62Appendices

Appendices63

Appendix A: Specifications

Size, Weight, and Power Consumption

Model		Dimensions (inches)			Weight	Power
	Height		Width	Depth	(lbs.)	(watts)
WD-60735	36.7		53.8	14.4	68.3	265
WD-65735	39.5		58.2	15.4	75.4	265
WD-73C8,	43.6		65.2	17.5	95	265
WD-73735
WD-65736	39.5		58.2	15.4	75.4	270
WD-73736	43.6		65.2	17.5	95	270
WD-65835	39.5		58.2	15.4	78	270
WD-73835	43.6		65.2	17.5	98	270
Inputs
Type		Qty.	Input Specifications
Antenna/Cable		2	RF
input			F connector, 75-ohm
HDMI (digital			CEA-861D standard for digital audio
video/audio)			and video via HDMI
			HDMI standard connector
WD-73C8		3
			Video:	60 Hz: 480i, 480p, 720p, 1080i
WD-60735				24 Hz, 30 Hz, 60 Hz: 1080p
WD-65735			Audio: PCM stereo
			HDMI inputs are compliant with
WD-73735
			CEA-861D standards for standard,
WD-65736		4
			extended, and high-definition video;
WD-73736			digital audio, and HDCP copy protec-
WD-65835			tion.
WD-73835			PC (digital signals only):
			VGA (640 x 480, 60 Hz)
			W-VGA (848 x 480, 60 Hz)
			SVGA (800 x 600, 60 Hz)
			W-SVGA (1064 x 600, 60 Hz)
			XGA (1024 x 768, 60 Hz)
			1280 x 720, 60 Hz
			SXGA (1280 x 1024, 60 Hz)
			1920 x 1080 (24 Hz, 30 Hz, 60 Hz)
			WXGA (1360 x 768, 60 Hz))
Composite		up	NTSC 480i only
Video		to 3	Video:	RCA Pin Plug, 1.0 V p-p,
				75 ohm
			1 dedicated composite video jack; 2
			shared with component video Y
S-Video		1	Four-Pin DIN Plug
			Y: 1.0 Vp-p 75-ohm
			C: 0.286 Vp-p (burst signal), 75-ohm
Component		up to 3	CEA-770.1 & CEA 770.2 480i, 480p,
Video (Y/Pr/Pb)		sets	CEA 770.3 720p and 1080i (TV
			analog component video standards)
			RCA Pin Plug
			Y: 1.0 Vp-p (includes sync),
			75-ohm
			Pr: 700 mV p-p, 75-ohm
			Pb: 700 mV p-p, 75-ohm
			1 dedicated set of component video
			jacks; 2 sets share a jack with com-
			posite video

USB Photo Port			1		For transfer of JPEG files only.
Audio Inputs			5		Analog left and right audio
				pairs	RCA Pin Plug 500 mV (full scale), 43-k
					ohm
Outputs
Description				Qty.	Output Specifications
Audio Speakers				2	5.75" x 2.4"
Analog Audio				1	RCA Pin Plug, 500 mV rms + 200 mV
(Signal)				pair	(full scale) for analog sources, 1.5
					Vrms + 0.5 Vrms (full scale) for digital
					sources.
Digital Audio				1	RCA Pin Plug, Signal Type Dolby
Output					Digital, PCM stereo
3-D Glasses				1	VESA 1997-11 Connector and Signal
Emitter					Standards for Stereoscopic Display
					Hardware
Image Technology							Lamp
DLP, 0.65” chip, 1920 x 1080 pixels with Smooth							180-watt VIP type
Picture™
Channel		Over-the-Air: VHF 2–13, UHF 14–69
Frequency		Analog Cable: 1–125
Reception		Digital Cable: 1–135
	Over the Air:					Analog NTSC, Digital ATSC with
						sub-channels (all 18 video formats)
Channel
						Analog NTSC (non-scrambled)
Type*
	Cable:					Digital QAM 64 and 256 with sub-
						channels (non-scrambled)

*Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel-number information provided by the broadcaster or cable company, the TV creates a channel number. The created channel number uses the frequency number as the main channel number and the program number as the sub-channel number.

Appendix B: Bypassing the Parental Lock

Future Reference

Lock Bypass Instructions Have Been Filed for

IMPORTANT

Cut along the dotted line and file bypass instructions in a safe place for future reference.

Bypassing the Parental Lock

After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus.

If you forget your pass code, you can view the locked TV without entering your pass code. When you are prompted for your pass code, press the number 9 and QV keys on the TV remote control at the same time. This process temporarily unlocks the TV.

When entering the Lock menu, this process deletes your old pass code and prompts you to enter a new pass code.

•You can either enter a new pass code to open the

Lock menu and make changes or press EXIT to close the menu.

•If any of the locks are turned on and you exit the menus when prompted for a new code, the old code and all lock settings are retained.

•If all locks are turned off and you exit the menus when prompted for a new code, then the previous code is erased.

IMPORTANT

When changing or deleting your pass code, you must use the remote control included with this TV. You cannot use a Mitsubishi remote control from another component or a “universal” remote.