Mitsubishi Electronics WD-65736 About NetCommand IR Control, Time, Important Note on NetCommand

505. TV Menus

Lock Menu, continued

Other Menu Options (alternate rating system)

6 NetCommand IR Control 51

This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply only to digital programming received on the ANT 1 and ANT 2 inputs.

Option Name and Description

Lock	On, Off	Enable or disable program blocking.
System Name The rating system available for the channel
Group	Rating groups available in the rating system shown on the screen. Rating groups are defined by
	the rating system in effect.
Rating	Rating restrictions available in the selected rating system and group. Highlight the rating and
	press ENTER to check (block) or uncheck (allow) rated content.

Time

Blocks all use of the TV during the time period you specify. You must enter a pass code to use the TV when the time lock is in effect.

Lock by Time	On, Off			Enable or disable Lock by Time.
Lock Time,	To set the lock and unlock times:
Unlock Time	1.	Highlight the hour digits for the Lock Time.
	2.	Press	repeatedly to change the hour and associated AM/PM indicator. To move quickly
		through the numbers, just press and hold.
	3.	Press ENTER to set the hour and highlight the minutes.
	4.	With the minutes highlighted, press			repeatedly to change the minutes. To move quickly
		through the numbers, just press and hold.
	5.	Highlight the Unlock Time digits and set the time as described above.

Note: To make Lock by Time active 24 hours a day, make Start Time and Stop Time the same.

Control Panel

On, Off	On locks and Off unlocks the buttons on the TV’s control panel. Use this option if small children
	may try to press TV buttons.
	If the remote control is unavailable, use the control panel to release the Control Panel Lock. Press
	and hold the MENU button for over eight seconds. You can do this to release the lock even if the TV
	is powered off. To reactivate the lock, you must return to this menu and change the setting to On.

About NetCommand IR Control

Note: To learn about NetCommand for HDMI devices, available on all TV models, see “NetCommand for HDMI Devices” on page 28.

•NetCommand IR home-theater control is avail- able on the following models:

--WD-65736, WD-73736 --WD-65835, WD-73835

•NetCommand setup is optional.

•You may wish to use NetCommand IR control to supplement CEC control.

•You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward.

•NetCommand operates by sending remote control signals from the TV to your other devices via the IR emitters, telling the devices to play, record, change inputs, adjust volume, change channels, or perform

Important Note on NetCommand

Be sure to connect the IR emitter cable to the TV and properly place the emitters so that NetCommand can control your devices. See the explanation on the next page.

other functions. All this is accomplished with the TV’s remote control and the slide switch left in the TV position.

•The IR “Learning” feature of NetCommand allows the TV to learn the IR control signals for your A/V devices.

•You can choose the level of NetCommand control for your home theater.

Standard Setup. Perform a standard setup if you:

Want NetCommand to control only a few devices, such as the TV, a playback device (like a DVD player), and a cable box. With this setup, you can use the TV’s remote control to operate these devices.

A/V Receiver Setup. Perform A/V receiver setup if you want NetCommand to:

Control a surround sound A/V receiver.

Automatically change audio input selections on an A/V receiver when you change inputs on the TV.

Automatically change audio and video input selections on an A/V receiver with an HDMI output to the TV.