Mitsubishi Electronics XD20A S e t t i n g N a r r o w I m a g e s A d v a n c e d M e n u

S e t t i n g N a r r o w I m a g e s ( A d v a n c e d M e n u )

Set the colors as desired in accordance with the image contents.

Subtle color settings are possible, as desired. Setting is possible for each input.

Setting the Cinema Mode

This is the setting for enjoying video in a dark or light room.

This feature emphasizes the White which is available on Video and S-Video input.

1 Select the image to be input (page 16).

2 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “COLOR”.

3 Use the cursor / keys to select “GAMMA”.

4 Use the cursor ◀ / ▶ keys to set the “GAMMA”.

The following can be selected.

●Normal ● Natural ● Real ● Custom Normal is standard settings; Natural stresses coloring; Real stresses (brightness). Custom is used to adjust freely as desired.

5 Use the cursor ◀ / ▶ keys to select “CUS-

TOM”, press the ENTER button to display the sub-menu and then set the gamma value. There are 31 index values.

Adjusting Color Balance

Color balance (white balance) can be set for each input.

1 Select the image to be input (page 16).

2 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “COLOR”.

3 Use the cursor / keys to select “COLOR TEMP”.

4 Use the cursor ◀ / ▶ keys to select the “COLOR TEMP”.

Four different types of color balance can be set beforehand: Low, Medium, Standard and High.

When the ENTER button is pressed, the sub-menu will be displayed to enable fine adjustment.

1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “COLOR”.

2 Use the cursor / keys to select “CIN- EMA”.

3 Use the cursor ◀ / ▶ keys to set the “CINEMA”.

The following can be selected.

"ON" is for a darkened room. Color around white portion is natural and smooth.

"OFF" is for a bright-lit room. White is empha- sized.

Selecting the Color System

The following color systems can be used with this device. ● NTSC 3.58 ● NTSC 4.43

● PAL ● PAL-M ● PAL-N ● PAL60

●SECAM

Only NTSC 3.58 and PAL can be used for component video.

Selection is automatic when AUTO is used.

1 Select an input for the color system to be selected (page 16).

2 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor ◀ / ▶ keys to select “COLOR”.

3 Use the cursor / keys to select “COLOR SYSTEM” and then press the ENTER button.

4 Use the cursor / keys to select the color system and then press the ENTER button.

To select other menu names

Press the MENU button. The cursor will disappear and the menu selection screen will be displayed.

To close the menu

Press the CANCEL button.

E – 26