U s i n g t h e R e m o t e C o n t r o l a s t h e P C M o u s e

The remote control of this projector can be used as the PC mouse (wireless mouse function) by connecting the MOUSE connector of this projector and the PC.

Remote control mouse functions

When the MOUSE button on the remote control is pressed, the button is lit in red.

 

 

 

This red light shows that the cursor key on the remote control operates the computer mouse

 

 

 

function.

 

 

 

When the MOUSE button is pressed again, the button's light goes off. In this condition the cursor

MOUSE

POWER

 

key operates the projector cursor function.

 

MOUSE button

MENU

If a computer running Windows is connected, the ENTER button on the remote control operates

VIDEO

RGB

 

CANCEL

 

as the computer mouse left click button and the CANCEL button as the computer mouse right

 

 

 

click button.

 

 

If a Macintosh computer is connected, the ENTER and CANCEL buttons operate in the same way as the computer mouse click button.

Connecting a PC and the MOUSE connector of this projector

Before connecting a PC

Before connecting, turn off the PC power. Turn off the power of this projector if it is on.

When connection is completed, turn on the power of this projector and then start the PC.

USB Port Connection

Connect the supplied USB mouse cable directly to the USB port (universal serial bus) of the personal computer, as shown in the diagram.

Personal computer USB port

USB mouse cable (accessory)

MOUSE connector

IBM PC/AT or Macintosh

AUDIO

 

RGB / YCbCr S-VIDEO VIDEO

 

 

 

 

 

 

To PS/2 MOUSE

IBM PS/2 compatible

 

 

 

 

 

port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PS/2 mouse cable (accessory)

IBM PS/2 Mouse Port Connection

Connect the supplied PS/2 mouse cable to the personal computer, as shown in the diagram.

Note

Depending on the personal computer, the mouse may not be recognized in some cases if not connected to the MOUSE connector before the personal computer power is turned on.

In the case of some notebook and laptop type personal computers, it may not be possible to use the standard pointing device (track ball, etc.) of the personal computer when connected to the MOUSE connector. In such case, it will not be possible to use the pointing device until the personal computer is rebooted, even if disconnected from the MOUSE connector.

E – 17

Page 17
Image 17
Mitsubishi Electronics XD20A Remote control mouse functions, USB Port Connection, IBM PS/2 Mouse Port Connection